Phone and System Administration
33
10. When you have finished programming the administrator telephone set, press the Speaker
button or # repeatedly to exit the programming session.
Programming the Hybrid Balance Option
A field technician runs a Hybrid Balance Test to ensure that analog trunks connected to the
5000 CP have the best hybrid balance settings. You can change the hybrid balance setting for
individual trunks.
To program the Hybrid Balance Option:
1. Dial 9932 (9132 in Europe). If a passcode is required (see page25), ENTER PASSCODE
appears (otherwise, go to step 3).
2. Enter the passcode, and then press #. ENTER DATABASE OPTION (1 - 3) appears.
3. Press 3 or the TRUNK menu button. ENTER TRUNK OPTION appears.
4. Press 1 or the INDIVIDUAL TRUNK menu button. ENTER TRUNK EXTENSION appears.
5. Enter the extension number, or enter a partial extension number, and then press # or the
ACCEPT menu button. The extension information that best matches the partial number
appears. You can use the Volume buttons or the NEXT and PREVIOUS menu buttons to
scroll through entries.
6. Press # or the ACCEPT menu button to accept the entry.
7. Press 3 or the HYBRID BALANCE menu button. HYBRID BALANCE OPTION (0 - 7) appears.
8. Enter the Hybrid Balance option (0 to 7), or use the Volume buttons or the NEXT and
PREVIOUS menu buttons to scroll through entries.
9. Press # or the ACCEPT menu button to accept the entry. DATABASE UPDATED appears.
10. When you have finished programming the administrator telephone set, press the Speaker
button or # repeatedly to exit the programming session.
Programming DTMF or Dial Pulse Signalling
You can program trunks for dual tone multi-frequency (DTMF) or dial pulse signalling.
To program DTMF or dial pulse signalling:
1. Dial 9932 (9132 in Europe). If a passcode is required (see page25), ENTER PASSCODE
appears (otherwise, go to step 3).
2. Enter the passcode, and then press #. ENTER DATABASE OPTION (1 - 3) appears.
3. Press 3 or the TRUNK menu button. ENTER TRUNK OPTION appears.
Note: At any time, you can press * to return to the previous menu, or press the Speaker
button to exit the programming session and cancel any unsaved changes.
Note: At any time, you can press * to return to the previous menu, or press the Speaker button
to exit the programming session and cancel any unsaved changes.