Mitel 5 Headset Enable, Headset Disable, System that a headset has been connected to the phone

Administrator Phone Guide

Table 12: Phone Feature Codes (continued)

Feature Name	Code	Definition
Headset Enable	315	(Not used on single line phones) The enable code signals the
Headset Disable	316	system that a headset has been connected to the phone. The
Headset On/Off	317	disable code returns the phone to normal operation. The on/off
		feature code can be used to toggle the feature on or off.
Hold – Individual	336	Places a call on hold so that it can be picked up directly at that
		phone or through a reverse transfer from any other phone.
Hold – System	335	Places an outside call on system hold. It can be picked up directly
		at any phone that has an individual trunk button and has allowed-
		answer and/or outgoing access for that trunk, or by the phone that
		placed it on hold. (If used on conference or intercom calls, the
		system places the call on individual hold.)
Hot Desk On/Off	348	Allows the phone user to log on to a Hot Desk-enabled base phone
		or log off of a Hot Desk session.
Hunt Group Remove	322	Removes the phone from its assigned hunt group(s) or places it in
Hunt Group Replace	323	again. Does not affect non-hunt group calls. The remove/replace
Hunt Group Remove/Replace	324	feature code can be used to toggle the feature.
LCD Contrast Adjustment	303	Adjusts the LCD contrast on the display. The phone must be idle
		to use this feature.
Message	365	This feature code is used for leaving and retrieving a message
		waiting indication at a called phone or the called phone’s message
		center. Depending on how the message was left, the called phone
		user either retrieves the message from his/her message center or
		from the phone that left the message.
Message – Cancel	366	Allows the phone user to cancel a message waiting indication that
		he or she left at another phone.
Message – Cancel Current	368	Cancels a message waiting indication that is waiting at the phone
		without requiring the user to respond to it.
Message – Silent	367	Leaves a Message Waiting indication at a phone without first
		placing an intercom call.
Mute On/Off	314	(Not used on single line phones) Turns the microphone on or off
		during a call. If muted, the phone user can hear the other party, but
		the party cannot hear the phone user.
Page	7	When followed by a paging zone code (0–9 or 0–49), it allows
		announcements to be made through phone speakers and any
		external paging speakers in the page zone.
Page On/Off	325	(Not used on single line phones) Halts pages through the phone
		speaker or allows them to be received again.
Program Buttons	397	(Not used on single line phones) User-programmable feature
		buttons and Station Speed Dial buttons can be programmed using
		this feature code.
		Page 4 of 6

66