Mitel 5 - page 56

Administrator Phone Guide

48

3. Enter the board (module) number, not the unit number, where the device to be seized is

located, while observing the following conditions:

• If you enter a single digit, press # after the digit to continue.

• If you enter an incorrect module number or if the module is not entered in the system,

INVALID BOARD NUMBER appears.

• If you have multiple ports (for example, dual-T1 or Internet Protocol Resource Appli-

cation (IPRA) ports) ENTER PORT appears.

4. Enter the (port) circuit number of the device to be seized. If you enter a single digit, press

# after the digit to continue. Valid numbers depend on the type of module. If you enter an

invalid module number, INVALID MODULE NUMBER appears.

• If there is only one device on the selected port, the selected device is seized as if the

user had directly entered the extension or trunk number.

• If there is more than one device on the selected port, ENTER DEVICE appears. Enter

the number of the device to be seized. Valid numbers depend on the type of devices

installed. If you enter an invalid device number, INVALID DEVICE NUMBER appears.

When the device has been selected, it is seized as if the user had directly entered the

extension or trunk access number.

5. Dial 9900 (9100 in Europe) to turn off diagnostics mode. DIAGNOSTICS OFF appears.

Contents

Main NOTICE System and Diagnostics Administrator Features Quick Reference Guide Enabling or Disabling System Diagnostics Mode Default Administrator Feature Codes Setting the System Day or Night Mode Setting the System or Network Date and Time Synchronizing Network Time Programming System Speed-Dial Numbers Chapter 1: Introduction Chapter 2: Phone and System Administration Page Appendix A : Reference Page Page Page Overview Administrator Types Additional References Feature References Previous Software and Hardware Versions Administrator Programming Planning Sheets System Networks and Nodes Multicultural English References Page Page Introduction Phone Feature Button Differences Supported Languages and Dial pad Character Descriptions Custom Characters Phones Supporting Newer Character Bitmaps Phones Supporting Old Character Bitmaps Phones Supporting Japanese Character Bitmaps Single-Node and Network (Multi-Node) Configurations System Day and Night Modes Setting a Single-Node System in Day or Night Mode Selecting Nodes for Day or Night Mode System Date and Time Setting the System Date and Time Synchronizing Network Times System Speed Dial Configuration Assistant Station (Phone) Programming Options Enabling or Disabling Other Phones as Administrator Phones Enabling or Disabling Attendant Phones Programming Extension User Names Programming Phone Toll Restrictions 21 Table 10: Default U.S. Class of Service Values Page Page 24 Figure 1: Station Programming Flowchart System Programming Options Entering an Administrator Phone Passcode Changing Do-Not-Disturb (DND) Messages Changing Default Reminder Messages Changing Phone Extension Numbers Swapping Phone Extension Numbers 30 Figure 2: System Database Programming Flowchart Individual Trunk Programming Options Programming the Trunk Answer Supervision Type Programming Caller ID Programming the Hybrid Balance Option Programming DTMF or Dial Pulse Signalling Programming Trunk Group Assignments Programming the Busy Trunk Option Trunk Group Programming Options Programming Trunk Group Day or Night Answer Access Programming Trunk Group Day or Night Ring-in Programming Trunk Group Toll Restrictions Programming Trunk Group Trunk Lists 40 Figure 3: Trunk Database Programming Flowchart 41 Figure 4: Trunk Database Programming Flowchart (Continued) Alarms Alarm Types Network Alarms Alarm Differences Responding to Alarms Clearing Alarms 45 Table 12: Minor System and Voice Processing Alarms (continued) Internal Modem Enabling or Disabling the Internal Modem Resetting the Internal Modem Network Group Diagnostics Running Network Group Diagnostics Seizing a Device Page History Freezes Freezing or Unfreezing the System History Freezing or Unfreezing the Network History Page Page Page Troubleshooting Tips System Administrator and Provider Information Administrator Troubleshooting Tips Programming Planning Sheets Administrator Phone Passcode Phone Information Do-Not-Disturb Messages 55 Reminder Messages To change the default messages, see Changing Default Reminder Messages on page 27. Table 4: Reminder Messages Table 3: Do-Not-Disturb Messages(continued) Page Individual Trunk Programming Trunk Group Programming Default Feature Codes Administrator Feature Codes 59 Diagnostics Feature Codes Table 10: Diagnostics Feature Codes Table 9: Administrator Feature Codes (continued) NOTICE Page Page 62 Trunk Access Codes Tabl e 11 lists trunk access codes used to select trunks when placing outgoing calls. Table 11: Trunk Access Codes 63 Phone Feature Codes Tabl e 12 lists phone feature codes. Table 12: Phone Feature Codes Page Page Page Page Page Index 69 Index A B C D 70 N P R S