Motorola MC9S12GC-Family, MC9S12C-Family warranty Table A-6 5V I/O Characteristics

Device User Guide — 9S12C128DGV1/D V01.05

Table A-6 5V I/O Characteristics

Conditions are 4.5< VDDX <5.5V Termperature from -40˚C to +140˚C, unless otherwise noted

Num	C	Rating	Symbol			Min	Typ	Max	Unit
1	P	Input High Voltage	VIH			0.65*VDD5	-	-	V
	T	Input High Voltage	VIH			-	-	VDD5 + 0.3	V
2	P	Input Low Voltage	VIL			-	-	0.35*VDD5	V
	T	Input Low Voltage	VIL			VSS5 - 0.3	-	-	V
3	C	Input Hysteresis	V	HYS			250		mV
		Input Leakage Current (pins in high ohmic input
4	P	mode)1		I	in	–1	-	1	μA
		Vin = VDD5 or VSS5
5	C	Output High Voltage (pins in output mode)	VOH			VDD5 – 0.8	-	-	V
		Partial Drive IOH = –2mA
6	P	Output High Voltage (pins in output mode)	VOH			VDD5 – 0.8	-	-	V
		Full Drive IOH = –10mA
7	C	Output Low Voltage (pins in output mode)	VOL			-	-	0.8	V
		Partial Drive IOL = +2mA
8	P	Output Low Voltage (pins in output mode)	V			-	-	0.8	V
		Full Drive IOL = +10mA		OL
9	P	Internal Pull Up Device Current,	IPUL			-	-	-130	μA
		tested at VIL Max.
10	C	Internal Pull Up Device Current,	IPUH			-10	-	-	μA
		tested at VIH Min.
11	P	Internal Pull Down Device Current,	IPDH			-	-	130	μA
		tested at VIH Min.
12	C	Internal Pull Down Device Current,	IPDL			10	-	-	μA
		tested at VIL Max.
13	D	Input Capacitance	Cin				7	-	pF
14	T	Injection current2	IICS			-2.5	-	2.5	mA
		Single Pin limit
		Total Device Limit. Sum of all injected currents	IICP			-25		25
15	P	Port P, J Interrupt Input Pulse filtered3	tPIGN					3	μs
16	P	Port P, J Interrupt Input Pulse passed3	tPVAL			10			μs
NOTES:

1.Maximum leakage current occurs at maximum operating temperature. Current decreases by approximately one-half for each 8 C to 12 C in the temperature range from 50 C to 125 C.

2.Refer to Section A.1.4 Current Injection, for more details

3.Parameter only applies in STOP or Pseudo STOP mode.

90