ISA DMA Channels

Notes

1.Internally generated by the PIB.

2.After a reset, all ISA IRQ interrupt lines default to edge-sensitive mode.

3.These PCI interrupts are routed to the ISA interrupts by programming the PRIQ Route Control registers in the PIB. The PCI-to-ISA interrupt assignments in this table are suggested. Each ISA IRQ to which a PCI interrupt is routed must be programmed for level-sensitive mode. Use this routing for PCI interrupts only when the RavenMPIC is either not present or not used.

4.The RavenMPIC, when present, should be used for these interrupts.

5

ISA DMA Channels

The MVME2300 series boards do not implement any ISA DMA channels.

http://www.motorola.com/computer/literature

5-7

Page 251
Image 251
Motorola MVME2300 Series manual ISA DMA Channels