Programming Model

1

 

PCI interface

MVME2300 and MVME2300SC boards are equipped with two IEEE 1386.1 PCI Mezzanine Card (PMC) slots. The PMC slots are 64-bit capable and support both front and rear I/O.

P2 I/O

Certain pins of each PMC slot connector are routed to VME backplane connector P2 for use in rear I/O configurations.

On MVME2300 boards, pins 1-64 of PMC slot 1 connector J14 are routed to rows C and A of the 5-row DIN P2 connector. Pins 1-46 of PMC slot 2 connector J24 are routed to rows D and Z of connector P2.

On MVME2300SC boards, pins 1-32 of PMC slot 1 connector J14 are routed to rows C and A of the 3-row DIN P2 connector. Pins 1-32 of PMC slot 2 connector J24 (as with J14) are routed to rows C and A of connector P2.

Additional PCI expansion is supported with a 114-pin Mictor connector. This connection allows stacking of one or two PMCspan dual-PMC carrier boards, to increase the I/O capability. Each PMCspan board requires an additional VME slot.

Programming Model

The following sections describe the memory maps for the MVME2300 series boards.

Processor Memory Maps

The Processor memory map is controlled by the Raven ASIC and the Falcon chip set. The Raven ASIC and the Falcon chip set have flexible programming Map Decoder registers to customize the system for many different applications.

http://www.motorola.com/computer/literature

1-7

Page 31
Image 31
Motorola MVME2300 Series manual Programming Model, PCI interface, Processor Memory Maps, P2 I/O