Multi-Tech Systems MT5634MSV manual Introduction, What You Will Need, Safety Warnings, We supply

MessageSaver User Guide

Introduction

We know you are eager to get your MessageSaver up and running, so we’ll show you step-by-step how to set it up, check it out, and make your first calls.

What You Will Need

Before starting, please make sure you have everything you need:

We supply

A MessageSaver data/fax/voice messaging modem

A DC power supply module

A set of four plastic feet

A modular telephone cable

An MT5634MSV setup disk

4A Quick Start Guide

A compact disc containing PhoneTools data, fax, voice, and messaging software, the MessageSaver User Guide, and other programs

You supply

A computer with an unused serial port

Ashielded RS-232 serial cable with a male DB-25 connector on one end and a connector to match your computer’s serial port on the other end

A nearby AC power outlet A nearby telephone line jack

An optional PC stereo microphone

4An optional headset, amplified speaker, or sound card with speakers

For connecting to a sound card, an optional male-to-male stereo patch cord with 1/8-inch mini plugs

Safety Warnings

•Use this product only with UL- and CUL-listed computers.

•To reduce the risk of fire, use only 26 AWG or larger telephone wiring.

•Never install telephone wiring during a lightning storm.

•Never install a telephone jack in a wet location unless the jack is specifically de- signed for wet locations.

•Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface.

•Use caution when installing or modifying telephone lines.

•Avoid using a telephone (other than a cordless type) during an electrical storm; there is a risk of electrical shock from lightning.

•Do not use a telephone in the vicinity of a gas leak.

6