2. Preparation
29
For Fax Advantage assistance, call 1-800-435-7329.
Initial Programming
2.11 Date and time1Press {MENU}.
SYSTEM SETUP
PRESS NAVI.[()]
2Press {#}, then {0}{1}.
SET DATE & TIME
PRESS SET
3Press {SET}.
LThe cursor (|) will appear on the display.
M:|01/D:01/Y:05
TIME: 12:00AM
4Enter the current month/date/year by
selecting 2 digits for each.
Example: August 10, 2005
Press {0}{8} {1}{0} {0}{5}.
M:08/D:10/Y:05
TIME: |12:00AM
5Enter the current hour/minute by selecting 2
digits for each. Press {*} to select “AM” or
“PM”.
Example: 10:15 PM (12 hour clock entry)
1. Press {1}{0} {1}{5}.
M:|08/D:10/Y:05
TIME: 10:15AM
2. Press {*} repeatedly to display “PM”.
M:|08/D:10/Y:05
TIME: 10:15PM
6Press {SET}.
LIf 3 beeps sound, the setting is not
correct. Start again from step 4.
SETUP ITEM [ ]
7Press {MENU} to exit.
Note:
LThe other party’s fax machine will print the
date and time on the top of each page you
send according to your unit’s date and time
setting.
LThe accuracy of the clock is approximately
±60 seconds a month.
To correct a mistake
Press {<} or {>} to move the cursor to the
incorrect number, and make the correction.
If you have subscribed to a Caller ID
service
The date and time will be automatically set
according to the received caller information.
LIf the time has not previously been set, Caller
ID will not adjust the clock.
{SET}
{MENU}
{<}{>}
FPG379-PFQX2138ZA-en.book Page 29 Wednesday, January 12, 2005 4:49 PM