4. Fax

50

4.4.3 Erasing a stored item from the broadcast memory
1Press {>}.
2Press {A} or {B} repeatedly to display
<BROADCAST>.
3Press {MENU}.
4Press {#}.
5Press {A} or {B} repeatedly to display the
desired item you want to erase.
LTo cancel erasing, press {STOP}.
6Press {SET}.
7Press {SET}.
LTo erase other items, repeat steps 5 to 7.
8Press {STOP}.
4.4.4 Sending the same document to pre-programmed parties
1Insert the document FACE DOWN.
2If necessary, press {A} or {B} repeatedly to
select the desired resolution (page 47).
3Press {>}.
4Press {A} or {B} repeatedly to display
<BROADCAST>.
5Press {START}.
LThe document will be fed into the unit and
scanned into memory. The unit will then
send the data to each party, calling each
number sequentially.
LAfter transmission, the stored document
will be erased from memory
automatically, and the unit will
automatically print a report (Broadcast
sending report).
Note:
LIf you select FINE, SUPER FINE or
PHOTO resolution, the number of pages
that the unit can send will decrease.
LIf the document exceeds the memory
capacity, transmission will be canceled.
LIf a party is busy or does not answer, it will be
skipped and redialed later.

To send the same document to a one-time

group of items

You can also select a one-time group of parties
to send the same document to. After
transmission, this group will be deleted.
1. Insert the document.
2. Press {>}.
3. Press {A} or {B} repeatedly to display
<ONE TIME BROAD>.
4. Press {SET} to start programming the
parties you want to send the document to.
5. Press {A} or {B} repeatedly to display the
desired party.
6. Press {SET}.
LTo program other parties, repeat steps 5
and 6 (up to 20 items).
7. Press {START} to start transmission to the
programmed parties.

To cancel broadcast transmission

1. Press {STOP} while BROADCASTING is
displayed.
LThe display will show SEND
CANCELED?.
2. Press {SET}.
FPG379-PFQX2138ZA-en.book Page 50 Wednesday, January 12, 2005 4:49 PM