4. Fax

47

4FaxSending Faxes
4.1 Sending a fax manually
1Adjust the width of the document guides (1)
to fit the actual size of the document.
2Insert the document (up to 10 pages) FACE
DOWN until a single beep is heard and the
unit grasps the document.
LIf the document guides are not adjusted
to fit the document, re-adjust them.
3If necessary, press {A} or {B} repeatedly to
select the desired resolution.
4Press {SP-PHONE}.
5Dial the fax number.
6When a fax tone is heard:
Press {FAX/S TART}.
When the other party answers your call:
Ask them to press their start button. When
the fax tone is heard, press {FAX/START}.
To select the resolution
Select the desired resolution according to the
type of document.
–“STANDARD”: For printed or typewritten
documents with normal-sized characters.
–“FINE”: For documents with small print.
–“SUPER FINE”: For documents with very
small print. This setting is effective only when
the other party has a compatible fax
machine.
–“PHOTO”: For documents containing
photographs, shaded drawings, etc.
LUsing the “FINE”, “SUPER FINE” and
“PHOTO” settings will increase transmission
time.
LIf the resolution setting is changed during
feeding, it will be effective from the next page.
To redial the last number
1. Press {REDIAL/PAUSE}.
2. Press {FAX/ START }.
LIf the line is busy, the unit will automatically
redial the number.
LTo cancel redialing, press {STOP}.
To send more than 10 pages at a time
Insert the first 10 pages of the document. Add
the other pages (up to 10 at a time) on top of the
previously inserted pages before the last page
feeds into the unit.
Pre-dialing a fax number
You can dial the fax number first before inserting
the document. This is convenient if you need to
refer to the document for the other party’s fax
number.
1. Enter the fax number.
2. Insert the document.
3. Press {FAX/ START }.
Sending from memory (Quick scan feature)
You can scan the document into memory before
sending. To use this feature, activate feature #34
(page 71) beforehand.
1. Insert the document.
2. Enter the fax number.
3. Press {FAX/ START }.
LThe document will be fed into the unit and
scanned into memory. The unit will then send
the data. If the document exceeds the
memory capacity, transmission will be
canceled and this feature will be turned OFF
automatically. You must send the entire
document manually.
LThis feature cannot be used if {SP-PHONE}
on the base unit, {TALK } or {SP-PHONE} on
the handset is pressed.
To stop transmission
Press {STOP}.

{FAX/START}

{SET}

{SP-PHONE}

{REDIAL/PAUSE}

{A}{B}
{STOP}{STOP}
{HELP}
1
FPG379-PFQX2138ZA-en.book Page 47 Wednesday, January 12, 2005 4:49 PM