1. Introduction and Installation
13
For Fax Advantage assistance, call 1-800-435-7329.
Installation (Base Unit)
1.6 Ink film
The included film roll is a starter ink film.

1.6.1 Installing the ink film

Important:
LRemove all the blue shipping tape from
the unit before installation.
1Open the front cover by pulling up the center
part.
2Release the back cover by pushing the green
button (1).
LYou can also release the back cover by
pushing in the green lever (2).
3Open the back cover.
4Insert the front ink film roll by inserting its
blue gear into the left slot of the unit (1).
Insert the rear ink film roll by inserting its
white gear into the left slot of the unit (2).
LThe ink film is safe to touch and will not
rub off on your hands like carbon paper.
LMake sure the blue gear (1) and white
gear (2) are installed as shown.
2
1
2
1
FPG379-PFQX2138ZA-en.book Page 13 Wednesday, January 12, 2005 4:49 PM