7. Answering Machine

7.5.2Remote operation using remote commands

{1} Repeat (During playback)

LThe current message is repeated.

LIf pressed within 5 seconds of playback, the previous message will be played.

{2} Skip (During playback)

LThe current message is skipped. The next message is played.

{4} New message playback

LOnly new messages are played back.

{5} All message playback

LAll messages are played back.

{6} Room monitor

LThe unit will monitor the sound for about 30

seconds in the room.

LAfter 30 seconds, a beep will sound. To continue monitoring, press {6} again within 10 seconds.

{7} Record greeting message

LAfter the long beep, talk for up to 16 seconds. Press {9} to end. The new greeting message will be played back.

{*}{4} To erase a specific message (During playback)

LThe current message is erased.

LA long beep will sound and the next message will be played.

{*}{5} To erase all messages

LA long beep will sound and all messages will be erased.

{8}{0} To turn OFF the answering machine

LThe unit hangs up and will not answer calls until turned ON again (page 52, 64).

{#} To skip the greeting message

LThe greeting message is skipped.

Turning message transfer ON or OFF

You must program a transfer telephone number beforehand (feature #60 on page 72).

LPress {8}{1} to turn ON the message transfer.

LPress {8}{2} to turn OFF the message transfer.

Turning pager call ON or OFF

You must program a pager number beforehand (feature #70 on page 73).

LPress {8}{3} to turn ON the pager call. L Press {8}{4} to turn OFF the pager call.

Recording a marker message

After playing back the messages, you can leave an additional message.

1.Wait for the voice guide. Voice guide:

“All messages have been played.”

2.Wait about 10 seconds. Voice guide:

“Please leave your name and message after the beep.”

3.Leave a message after the beep.

To turn ON the AUTO ANSWER mode

1.Call your unit and let it ring 10 rings.

LThe answering machine will temporarily answer the call.

2.Enter the remote operation ID during the greeting message.

LA long beep will sound, and the receiving mode will be set to TAM/FAX.

3.Hang up the handset.

64

Page 66
Image 66
Panasonic KX-FPG379, KX-FPG378 manual Remote operation using remote commands