Chapter 4 Settings — [DISPLAY OPTION] menu

[DVI-D IN]

Switch the setting when the external device is connected to the <DVI-D IN> terminal of the projector and the image is not projected correctly.

1)Press as to select [DVI-D IN].

2)Press the <ENTER> button.

ff The [DVI-D IN] screen is displayed.

3)Press as to select [EDID].

4)Press qw to switch the item.

ff The items will switch each time you press the button.

[EDID3]

Recognizes movie-based video signals and still image signals automatically.

[EDID1]

Select mainly when an external device that outputs movie-based video signals (such as a blu-ray disc

player) is connected to the <DVI-D IN> terminal.

 

[EDID2:PC]

Select mainly when an external device that outputs still image signals (such as a computer) is

connected to the <DVI-D IN> terminal.

 

5)Press as to select [SIGNAL LEVEL].

6)Press qw to switch the item.

ff The items will switch each time you press the button.

[AUTO]

Automatically sets the signal level.

[0‑255:PC]

Select when an external device (such as a computer) is connected via the DVI‑D terminal output.

[16‑235]

Select when an external device (such as a blu-ray disc player) is connected via the HDMI terminal

output using a conversion cable, etc.

 

Note

ff The optimal setting varies depending on the output setting of the connected external device. Refer to the operating instructions of the external device regarding the output of the external device.

ff The data for Plug and play will change when the setting is changed. Refer to “List of compatible signals” (x page 175) for a resolution that supports plug and play.

[HDMI IN]

Switch the setting when the external device is connected to the <HDMI IN> terminal of the projector and the image is not projected correctly.

1)Press as to select [HDMI IN].

2)Press the <ENTER> button.

ff The [HDMI IN] screen is displayed.

3)Press qw to switch the [SIGNAL LEVEL] item.

ff The items will switch each time you press the button.

[AUTO]

Automatically sets the signal level.

[64‑940]

Select when the HDMI terminal of an external device (such as a blu-ray disc player) is connected to

the <HDMI IN> terminal.

 

 

Select when the DVI‑D terminal output of an external device (such as a computer) is connected to the

[0‑1023]

<HDMI IN> terminal via a conversion cable or similar cable.

Select also when the HDMI terminal output of a computer or other device is connected to the <HDMI

 

 

IN> terminal.

Note

ff The optimal setting varies depending on the output setting of the connected external device. Refer to the operating instructions of the external device regarding the output of the external device.

ff The HDMI signal level is displayed for every 30 bits of input.

[SDI IN]

(Only for PT‑DZ13KU, PT‑DS12KU, PT‑DZ10KU)

Set to match the signal to input to the <SDI IN 1>/<SDI IN 2> terminals (PT‑DZ13KU, PT‑DS12KU) or <SDI IN> terminal (PT‑DZ10KU).

100 - ENGLISH