Panasonic PT-DS12KU, PT-DW11KU, PT-DZ10KU, PT-DZ13KU Making adjustments and selections, 1) 8), 7) 9), 1) 5) 7) 8) 9), Press the input selection (<RGB1>, <RGB2, Change the settings of the [PROJECTOR SETUP] menu

Chapter 3 Basic Operations — Switching on/off the projector

Making adjustments and selections

It is recommended that images are projected continuously for at least 30 minutes before the focus is adjusted.

		2)	1) 5) 7) 8) 9)
		MENU	LENS
	VIDEO	ENTER
SDI 1/2	RGB 1
	RGB 2	AUTO	SHUTTER	1) 8)
3)		SETUP
	DVI-D	6)
	HDMI
4)	SDI 1/2

6)

3)

2)

5)

7) 9)

1)Press the <FOCUS> button to roughly adjust the focus of the image. (x page 56)

2)Change the settings of the [PROJECTOR SETUP] menu → [PROJECTION METHOD] and [COOLING CONDITION] depending on the installation mode. (x page 31)

ff Refer to “Navigating through the menu” (x page 65) for the operation of the menu screen.

3)Press the input selection (<RGB1>, <RGB2>, <DVI-D>, <VIDEO>, <HDMI>, <SDI 1/2>) buttons to select the input signal.

(SDI input is only for PT‑DZ13KU, PT‑DS12KU, PT‑DZ10KU)

4)Adjust the front, back and sideway tilt of the projector with the adjustable feet. (x page 45)

5)Press the <SHIFT> button to adjust the position of the image.6)If the input signal is an RGB signal, press the <AUTO SETUP> button.7)Press the <ZOOM> button to adjust the size of the image to match the screen.8)Press the <FOCUS> button again to adjust the focus.

9)Press the <ZOOM> button again to adjust the zoom and the size of the image to match the screen. Note

ff When the projector is switched on for the first time after purchase as well as when [ALL USER DATA] in the [PROJECTOR SETUP] menu → [INITIALIZE] is executed, the focus adjustment screen is displayed after projection starts, then the initial setting screen is displayed. Refer to “Start-up display” (x page 22) for details.

54 - ENGLISH