Panasonic PT-DS12KU, PT-DW11KU, PT-DZ10KU, PT-DZ13KU [INPUT RESOLUTION], [CLAMP POSITION], Item, Note, Note, Press, screen, [LEFT], screen, screen, Status, [UPPER], [LOWER], [RIGHT], Operation, Adjustment

Chapter 4 Settings — [ADVANCED MENU] menu

Blanking correction	Item	Operation	Adjustment	Range of adjustment
		Press the q	The blanking zone
Top of the screen	[UPPER]	button.	moves upward.	PT‑DZ13KU, PT‑DZ10KU:
		Press the w	The blanking zone
		button.	moves downward.	Top to bottom 0 - 599
				PT‑DS12KU: Top to bottom
		Press the w	The blanking zone	0 - 524
				PT‑DW11KU: Top to bottom
Bottom of the		button.	moves upward.	0 - 383
	[LOWER]
screen		Press the q	The blanking zone
		button.	moves downward.
		Press the w	The blanking zone
Left side of the		button.	moves to the right.
	[LEFT]
screen		Press the q	The blanking zone	PT‑DZ13KU, PT‑DZ10KU:
		button.	moves to the left.	Left to right 0 - 959
				PT‑DS12KU: Left to right
		Press the q	The blanking zone	0 - 699
				PT‑DW11KU: Left to right
Right side of the		button.	moves to the right.	0 - 682
	[RIGHT]
screen		Press the w	The blanking zone
		button.	moves to the left.

[INPUT RESOLUTION]

You can adjust to achieve an optimal image when there is a flickering image or smeared outlines.

1)Press as to select [INPUT RESOLUTION].

2)Press the <ENTER> button.

ff The [INPUT RESOLUTION] screen is displayed.

3)Press as to select [TOTAL DOTS], [DISPLAY DOTS], [TOTAL LINES], or [DISPLAY LINES], and press qw to adjust it.

ff Values corresponding to the signal being input are displayed automatically for each item. Increase or decrease the displayed values and adjust to the optimal point viewing the screen when there are vertical stripes or sections are missing from the screen.

Note

ff Previously mentioned vertical banding will not occur with all white signal input.

ff The image may be disrupted while performing the adjustment, but it is not a malfunction.

ff [INPUT RESOLUTION] can be adjusted only when an RGB signal is input to the <RGB 1 IN> terminal or the <RGB 2 IN> terminal. ff Certain signals may not be adjustable.

[CLAMP POSITION]

You can adjust the optimal point when the black part of the image is blunt or it has turned green.

1)Press as to select [CLAMP POSITION].2)Press qw to adjust.

Status	Rough guide for optimal value	Range of adjustment
The black part is blunt.	The point where bluntness of the black part improves the most is
	the optimal value.
		1 - 255
The black part is green.	The point where the green part becomes black, and the bluntness
	has improved is the optimal value.

Note

ff [CLAMP POSITION] can be adjusted only when a signal is input to the <RGB 1 IN> terminal or the <RGB 2 IN> terminal. ff Certain signals may not be adjustable.

86 - ENGLISH