Chapter 4 Settings — [DISPLAY OPTION] menu

[DISPLAY OPTION] menu

On the menu screen, select [DISPLAY OPTION] from the main menu, and select an item from the sub-menu.

Refer to “Navigating through the menu” (x page 65) for the operation of the menu screen. ff After selecting the item, press asqw to set.

[COLOR MATCHING]

Correct the color difference between projectors when using multiple projectors simultaneously.

Adjusting the color matching as desired

1)Press as to select [COLOR MATCHING].

2)Press qw to switch the item.

ff The items will switch each time you press the button.

[OFF]

Color matching adjustment is not carried out.

[3COLORS]

Adjusts the three colors [RED], [GREEN], or [BLUE].

[7COLORS]

Adjusts the seven colors [RED], [GREEN], [BLUE], [CYAN], [MAGENTA], [YELLOW], or [WHITE].

[709MODE]

Refer to “Adjusting the color matching using a colorimeter” (x page 97) for details about this mode.

[MEASURED]

 

3)Select [3COLORS] or [7COLORS], and press the <ENTER> button.

ff The [3COLORS] or [7COLORS] screen is displayed.

4)Press as to select [RED], [GREEN], or [BLUE] ([RED], [GREEN], [BLUE], [CYAN], [MAGENTA], [YELLOW], or [WHITE] for [7COLORS]).

5)Press the <ENTER> button.

ff The [3COLORS:RED], [3COLORS:GREEN], or [3COLORS:BLUE] screen is displayed.

For [7COLORS], the [7COLORS:RED], [7COLORS:GREEN], [7COLORS:BLUE], [7COLORS:CYAN], [7COLORS:MAGENTA], [7COLORS:YELLOW], or [7COLORS:WHITE] screen is displayed.

ff Set [AUTO TESTPATTERN] to [ON] to display a test pattern of selected colors.

6)Press as to select [RED], [GREEN], or [BLUE].7)Press qw to adjust.

ff The adjustment value changes between 0 and 2 048.

Note

ff Operation when correcting the adjustment color

When the correction color same as the adjustment color is changed: The luminance of the adjustment color changes.

When correction color red is changed: Red is added to or subtracted from the adjustment color.

When correction color green is changed: Green is added to or subtracted from the adjustment color.

When correction color blue is changed: Blue is added to or subtracted from the adjustment color.

ff This adjustment should be carried out by a person who is familiar with the projector or by a service person because a high level of skill is required to make a successful adjustment.

ff Pressing the <DEFAULT> button will restore the factory default settings for all items.

ff When [COLOR MATCHING] is set to other than [OFF], [COLOR TEMPERATURE] is fixed to [USER1].

ff Set [3D COLOR MATCHING] (x page 93) to set whether 2D and 3D signals are set separately or whether common data is used. (Only for PT‑DZ13KU, PT‑DS12KU, PT‑DW11KU)

ff When 2D and 3D settings are set separately, [NATIVE] or [3D] is displayed in the upper right of the menu. (Only for PT‑DZ13KU, PT‑DS12KU, PT‑DW11KU)

96 - ENGLISH