Chapter 4 Settings — [PROJECTOR SETUP] menu

2)Press the <ENTER> button.

ff The [RS-232C]screen is displayed.

3)Press as to select [RESPONSE(ID ALL)].

4)Press qw to switch the item.

[ON]

Returns the response when the ID setting is ALL.

[OFF]

Does not return the response when the ID setting is ALL.

5)Press as to select [GROUP].

6)Press qw to switch the item.

[A] - [Z]

Controls multiple projectors simultaneously by sending the ID of RS‑232C. You can set groups from

[A] to [Z]. The projector responds when the ID of RS‑232C matches the setting.

 

7)

Press as to select [RESPONSE(ID GROUP)].

8)

Press qw to switch the item.

 

 

 

 

[ON]

Returns the response when the ID setting is GROUP.

 

[OFF]

Does not return the response when the ID setting is GROUP.

Note

ff Refer to “<SERIAL IN>/<SERIAL OUT> terminal” (x page 169).

[STATUS]

Display the status of the projector.

1)Press as to select [STATUS].

2)Press the <ENTER> button.

ff The [STATUS] screen is displayed.

3)Press qw to switch the pages.

ff The page will change each time you press the button.

[INPUT]

Displays the input terminal currently selected.

[SIGNAL NAME]

Displays the input signal name.

 

[SIGNAL FREQUENCY]

Displays the frequency of the input signal.

[PROJECTOR RUNTIME]

Displays the operation times of the projector.

[LAMP1]*1

Displays the runtime and status of Lamp 1.

[LAMP2]*1

Displays the runtime and status of Lamp 2.

[INTAKE AIR TEMP.]

Displays the status of the air intake temperature of the projector.

[OPTICS MODULE TEMP.]

Displays the status of the internal temperature of the projector.

[AROUND LAMP TEMP.]

Displays the status of the temperature around the lamps of the projector.

[PROJECTOR TYPE]

Displays the type of the projector.

 

[SERIAL NUMBER]

Displays the serial number of the projector.

[LAMP UNIT MODEL NO.]

Displays the model no. of the lamp unit.

[LAMP1 SERIAL NUMBER]

Displays the serial number of the lamp 1.

[LAMP2 SERIAL NUMBER]

Displays the serial number of the lamp 2.

[MAIN VERSION]

Displays the main version of the firmware of the projector.

[SUB VERSION]

Displays the sub version of the firmware of the projector.

[NETWORK VERSION]

Displays the firmware version of the projector.

[UPGRADE(ET‑UK20)]

Displays the activation status based on the Upgrade Kit.

 

[POWER ON TIMES]

 

Displays the number of times the power is turned on.

[ON COUNT]

[LAMP1 ON]

 

Displays the number of times the lamp is turned on.

 

[LAMP2 ON]

 

 

 

 

[LAMP1]

Displays runtime in detail.

 

[LAMP2]

Displays runtime in detail.

 

[NUMBER OF REGISTERED

Displays the number of registered signals.

SIGNAL]

 

 

 

ENGLISH - 119