Panasonic PT-DS12KU, PT-DW11KU, PT-DZ10KU, PT-DZ13KU [Network config] page, [DNS1], [DNS2], [CAUTION!], [IP ADDRESS], [SUBNET MASK], [Back]/[Next], [PROJECTOR NAME], [DEFAULT GATEWAY], [DHCP ON]/[DHCP OFF]

Chapter 4 Settings — [NETWORK] menu

[Network config] page

Click [Detailed set up] → [Network config].

ff Click [Network config] to display the [CAUTION!] screen.

ff The current settings are displayed by pressing the [Next] button.

ff Click [Change] to display the setting change screen.

							1
						2
					3
							4
				5
							6
							7
								8
1	[PROJECTOR NAME]	6	[DNS1]
	Enter the name of the projector. Enter the host name if it is		Enter the DNS1 server address.
	required when using a DHCP server etc.		Permissible characters for the entry of DNS1 server address
2	[DHCP ON]/[DHCP OFF]		(primary):
			Numbers (0 - 9), period (.)
	To enable the DHCP client function, set to [DHCP ON].
			(Example: 192.168.0.253)
3	[IP ADDRESS]
		7	[DNS2]
	Enter the IP address when not using a DHCP server.
4	[SUBNET MASK]		Enter the DNS2 server address.
			Available characters for the entry of DNS2 server address
	Enter the subnet mask when not using a DHCP server.
			(secondary):
5	[DEFAULT GATEWAY]
			Numbers (0 - 9), period (.)
	Enter the default gateway address when not using a DHCP		(Example: 192.168.0.254)
	server.	8	[Back]/[Next]

Click the [Back] button to return to the original screen. The current settings are displayed by pressing the [Next] button. Click the [Submit] button to update the settings.

Note

ff When you use the “Forward” and “Back” functions of your browser, a warning message “Page has Expired” may appear. In that case, click [Network config] again since the following operation will not be guaranteed.

ff Changing LAN settings while connected to the LAN may cause the connection to cut out.

ENGLISH - 143