Chapter 4 Settings — [SECURITY] menu

[SECURITY] menu

On the menu screen, select [SECURITY] from the main menu, and select an item from the sub- menu.

Refer to “Navigating through the menu” (x page 65) for the operation of the menu screen. ff When the projector is used for the first time

Initial password: Press awsqawsq in order, and press the <ENTER> button. ff After selecting the item, press asqw to set.

Attention

ff When you select the [SECURITY] menu and press the <ENTER> button, entering a password is required. Enter the preset password and then continue operations of the [SECURITY] menu.

ff When the password has been changed previously, enter the changed password, and press the <ENTER> button.

Note

ff The entered password is displayed with*marks on the screen.

ff An error message is displayed on the screen when the entered password is incorrect. Re-enter the correct password.

[SECURITY PASSWORD]

The [SECURITY PASSWORD] screen is displayed when the power is turned on. When the entered password is incorrect, the operation will be restricted to the power standby <v> button, the <SHUTTER> button, and the <LENS> (<FOCUS>, <ZOOM>, and <SHIFT>) buttons.

1)Press as to select [SECURITY PASSWORD].

2)Press qw to switch the item.

ff The items will switch each time you press the button.

[OFF]

Disables the security password entry.

[ON]

Enables the security password entry.

Note

ff The [SECURITY PASSWORD] setting is set to [OFF] by the factory default or when [ALL USER DATA] in [INITIALIZE] (x page 124) is executed.

ff Change the password periodically that is hard to guess.

ff The security password is enabled after setting [SECURITY PASSWORD] to [ON] and turning the <MAIN POWER> switch to <OFF>.

[SECURITY PASSWORD CHANGE]

Change the security password.

1)Press as to select [SECURITY PASSWORD CHANGE].

2)Press the <ENTER> button.

ff The [SECURITY PASSWORD CHANGE] screen is displayed.3)Press asqw and the number (<0> - <9>) buttons to set the password.

ff Up to eight button operations can be set.

4)Press the <ENTER> button.

5)Re-enter the password for the confirmation.

6)Press the <ENTER> button.

Note

ff The entered password is displayed with*marks on the screen.

ff An error message is displayed on the screen when the entered password is incorrect. Re-enter the correct password.

ENGLISH - 131