Chapter 4 Settings — [SECURITY] menu

[DISPLAY SETTING]

Overlap the security message (text or image) over the projecting image.

1)Press as to select [DISPLAY SETTING].

2)Press qw to switch the item.

ff The items will switch each time you press the button.

[OFF]

The text display is disabled.

[TEXT]

The text display is enabled.

[USER LOGO]

Displays the image registered by the user.

Note

ff To create/register the [USER LOGO] image, use “Logo Transfer Software” included in the supplied CD-ROM.

[TEXT CHANGE]

Change the text displayed when the text display is enabled by selecting [TEXT] in [DISPLAY SETTING].

1)Press as to select [TEXT CHANGE].

2)Press the <ENTER> button.

ff The [TEXT CHANGE] screen is displayed.

3)Press asqw to select the text, and press the <ENTER> button to enter the text.

4)Press asqw to select [OK], and press the <ENTER> button.

ff The text is changed.

[CONTROL DEVICE SETUP]

Enable/disable the button operations on the control panel and the remote control.

1)Press as to select [CONTROL DEVICE SETUP].

2)Press the <ENTER> button.

ff The [CONTROL DEVICE SETUP] screen is displayed.

3)Press as to select [CONTROL PANEL] or [REMOTE CONTROL].

[CONTROL PANEL] You can set the limitation on the control from the control panel.

[REMOTE CONTROL] You can set the limitation on the control from the remote control.

4)Press the <ENTER> button.

ff The [CONTROL PANEL] screen or the [REMOTE CONTROL] screen is displayed.

5)Press as to select [CONTROL PANEL] or [REMOTE CONTROL].

6)Press qw to switch the item.

ff You can set the operation restriction from the control panel or the remote control.

[ENABLE]

Enables all button operations.

[DISABLE]

Disables all button operations.

[USER]

Operation of all buttons can be enabled/disabled separately.

Refer to “Enabling/disabling any button” (x page 132) for details.

 

7)Press as to select [APPLY], and press the <ENTER> button.

ff The confirmation screen is displayed.

8)Press qw to select [OK], and press the <ENTER> button.

Enabling/disabling any button

1)Press as to select [CONTROL DEVICE SETUP].

132 - ENGLISH