Panasonic PT-DS12KU, PT-DW11KU, PT-DZ10KU, PT-DZ13KU [PICTURE] menu, [PICTURE MODE], [CONTRAST], Changing the [USER] name, Note, Press, Press, [USER], [CINEMA], [GRAPHIC], [STANDARD], 2)Press the qw

Chapter 4 Settings — [PICTURE] menu

[PICTURE] menu

On the menu screen, select [PICTURE] from the main menu, and select an item from the sub- menu.

Refer to “Navigating through the menu” (x page 65) for the operation of the menu screen. ff After selecting the item, press asqw to set.

[PICTURE MODE]

You can switch to the desired picture mode suitable for the image source and the environment in which the projector is used.

1)Press as to select [PICTURE MODE].2)Press the qw.

ff The [PICTURE MODE] individual adjustment screen is displayed.

3)Press qw to switch the item.

ff The items will switch each time you press the button.

[STANDARD]	The image becomes suitable for moving images in general.
[CINEMA]	The image becomes suitable for movie contents.
[NATURAL]	The image is sRGB compliant.
[DICOM SIM.]	The image becomes similar to that of DICOM Part 14 Grayscale Standard.
[DYNAMIC]	The light output is maximized for use in bright areas.
[GRAPHIC]	The image becomes suitable for input from the personal computer.
[USER]	Set any desired picture mode.

Note

ff The factory default picture mode is [GRAPHIC] for still image input signals and [STANDARD] for movie-based input signals.

ff DICOM is an abbreviation of “Digital Imaging and Communication in Medicine” and is a standard for medical imaging devices. Although the DICOM name is used, the projector is not a medical device, and should not be used for purposes such as diagnosis of display images.

ff Press the <ENTER> button when each [PICTURE MODE] is selected to save as a specified value when a new signal is input. The data of all items except [SYSTEM SELECTOR] in the [PICTURE] menu is saved.

ff In the factory default settings, [USER] is set to images that comply with the ITU‑R BT.709 standard.

Changing the [USER] name

1)Press as to select [PICTURE MODE].

2)Press qw to select [USER].

3)Press the <ENTER> button.

ff The [PICTURE MODE] detailed screen is displayed.

4)Press as to select [PICTURE MODE NAME CHANGE], and press the <ENTER> button.ff The [PICTURE MODE NAME CHANGE] screen is displayed.

5)Press asqw to select the text, and press the <ENTER> button to enter the text.

6)Press asqw to select [OK], and press the <ENTER> button.

ff The picture mode name is changed.

[CONTRAST]

You can adjust the contrast of the colors.

1)Press as to select [CONTRAST].

ENGLISH - 71