Chapter 4 Settings — [PROJECTOR SETUP] menu

2)Press the <ENTER> button.

ff The [DATE AND TIME] screen is displayed.

3)Press as to select [ADJUST CLOCK].

4)Press the <ENTER> button.

ff The [ADJUST CLOCK] screen is displayed.

5)Press as to select [NTP SYNCHRONIZATION], and press qw to change the setting to [ON].

6)Press as to select [APPLY], and press the <ENTER> button.

ff The setting of the date and time will be completed.

Note

ff To set the date and time automatically, the projector must be connected to the network.

ff If synchronization with the NTP server fails just after [NTP SYNCHRONIZATION] is turned [ON], or if [NTP SYNCHRONIZATION] is turned [ON] while the NTP server is not set, [NTP SYNCHRONIZATION] will return to [OFF].

ff Access the projector via a web browser to set the NTP server. Refer to “[Adjust clock] page” (x page 144) for details.

[LENS CALIBRATION]

Automatically set the lens shift limit values and home position for the projector.

1)Press as to select [LENS CALIBRATION].

2)Press the <ENTER> button.

ff The confirmation screen is displayed.

3)Press qw to select [OK], and press the <ENTER> button.

ff To cancel, select [CANCEL].

ff The lens moves up, down, left, and right to automatically set the lens shift limit values and home position.

ff The lens stops to complete the calibration.

Note

ff [PROGRESS] is displayed on the menu during lens calibration. Cannot cancel mid-operation.

ff When lens calibration executes correctly, [COMPLETE] is displayed and [INCOMPLETE] is displayed when it does not execute correctly. ff Pressing the <FOCUS> button on the remote control for at least three seconds will also display the confirmation screen for lens calibration

execution.

[LENS MEMORY]

Save and load the focus position, shift position, and zoom position of an adjusted lens.

Saving lens position

1)Press as to select [LENS MEMORY].

2)Press the <ENTER> button.

3)Press as to select [LENS MEMORY SAVE].

4)Press the <ENTER> button.

ff The [LENS MEMORY SAVE] screen is displayed.

5)Press as to select the item to save, and press the <ENTER> button.

6)When the confirmation screen is displayed, press qw to select [OK], and press the <ENTER> button.

ff The [LENS MEMORY NAME INPUT] screen is displayed.

7)Press asqw to select the text, and press the <ENTER> button to enter the text.

8)After the name is input, press asqw to select [OK], and press the <ENTER> button.

ff The registration completes and returns to the [LENS MEMORY SAVE] screen.

ff If you press asqw to select [CANCEL] and then press the <ENTER> button, the lens memory will not be saved.

ff If you press asqw to select [DEFAULT] and press the <ENTER> button, the entered name will not be registered and the default name will be used.

ff If you select [OK] without entering any characters and press the <ENTER> button, the default name will be used.

122 - ENGLISH