Chapter 4 Settings — [DISPLAY OPTION] menu

Setting [SDI LINK]

(Only for PT‑DZ13KU, PT‑DS12KU)

1)Press as to select [SDI IN].

2)Press the <ENTER> button.

ff The [SDI IN] screen is displayed.

3)Press as to select [SDI LINK].

4)Press qw to switch the item.

[SINGLE LINK]

Sets SDI1 input and SDI2 input to single link.

[DUAL LINK]

Sets SDI1 input and SDI2 input to dual link.

Setting [SIGNAL LEVEL]

Select the amplitude of the signal to input.

1)Press as to select [SDI IN].

2)Press the <ENTER> button.

ff The [SDI IN] screen is displayed.

3)Press as to select [SIGNAL LEVEL].

4)Press qw to switch the item.

[64‑940]

Normally use this setting.

[4‑1019]

Select when gray is displayed as black.

Setting [BIT DEPTH]

1)Press as to select [SDI IN].

2)Press the <ENTER> button.

ff The [SDI IN] screen is displayed.

3)Press as to select [BIT DEPTH].

4)Press qw to switch the item.

[AUTO]

Automatically select 12 bits or 10 bits.

[12‑bit]

Fix to 12 bits.

[10‑bit]

Fix to 10 bits.

Setting [3G‑SDI MAPPING]

1)Press as to select [SDI IN].

2)Press the <ENTER> button.

ff The [SDI IN] screen is displayed.

3)Press as to select [3G‑SDI MAPPING].

4)Press qw to switch the item.

[AUTO]

Automatically select level A or level B.

[LEVEL A]

Fix to level A.

[LEVEL B]

Fix to level B.

Note

ff Does not operate during SD‑SDI or HD‑SDI input.

ENGLISH - 101