Panasonic PT-DS12KU, PT-DW11KU, PT-DZ10KU, PT-DZ13KU [AUTO SIGNAL], [AUTO SETUP], Setting with [MODE], Adjusting position automatically, Press, [OFF], Press, Press, Press, Press, Model No, PT‑DS12KU, [DEFAULT]

Chapter 4 Settings — [DISPLAY OPTION] menu

3)Press qw to switch the [SCREEN FORMAT] item.

ff The items will switch each time you press the button.

Model No.	[SCREEN FORMAT]	Range when [SCREEN POSITION] is selected
	[16:10]	Cannot be adjusted.
PT‑DZ13KU, PT‑DZ10KU	[4:3]	Adjusts the horizontal position between ‑160 and 160.
	[16:9]	Adjusts the vertical position between ‑60 and 60.
PT‑DS12KU	[4:3]	Cannot be adjusted.
	[16:9]	Adjusts the vertical position between ‑132 and 131.

4)Press as to select [SCREEN POSITION].

ff If [SCREEN FORMAT] is set to [16:10] in PT‑DZ13KU and PT‑DZ10KU, or [SCREEN FORMAT] is set to [4:3] in PT‑DS12KU, then selection and adjustment of [SCREEN POSITION] are not available.

5)Press qw to adjust [SCREEN POSITION].

[AUTO SIGNAL]

Set whether to execute automatic setup of signals automatically.

The screen display position or signal level can be adjusted automatically without pressing the <AUTO SETUP> button on the remote control on each occasion if you input unregistered signals frequently at meetings, etc.

1)Press as to select [AUTO SIGNAL].

2)Press qw to switch the item.

ff The items will switch each time you press the button.

[OFF]	Sets the auto signal function to off.
[ON]	Executes automatic setup automatically when images are changed to unregistered signals during
	projection.

[AUTO SETUP]

Set this when adjusting a special signal or horizontally long (such as 16:9) signal.

Setting with [MODE]

1)Press as to select [AUTO SETUP].

2)Press the <ENTER> button.

ff The [AUTO SETUP] screen is displayed.

3)Press as to select [MODE].

4)Press qw to switch the item.

ff The items will switch each time you press the button.

[DEFAULT]	Standard setting.
[WIDE]	Select when an image aspect is a wide-screen signal, which does not meet the [DEFAULT] settings.
[USER]	Select when receiving a signal with a special horizontal resolution (number of display dots).

ff When [DEFAULT] or [WIDE] is selected, proceed to Step 7). ff When [USER] is selected, proceed to Step 5).

5)Press as to select [DISPLAY DOTS], and press qw to adjust [DISPLAY DOTS] to the horizontal resolution of the signal source.

6)Press as to select [MODE].7)Press the <ENTER> button.

ff Automatic adjustment is executed. [PROGRESS] is displayed while automatically adjusting. When complete, the system returns to the

[AUTO SETUP] screen.

Adjusting position automatically

1)Press as to select [AUTO SETUP].

98 - ENGLISH