Chapter 4 Settings — [3D SETTINGS] menu

[3D SYNC MODE]

Items set in [3D SYNC1]

Items set in [3D SYNC2]

[10]

Stereo synch output

Frame synch output

[11]

3D IR TRANSMITTER (+) output

3D IR TRANSMITTER (-) output

6)When [1], [4], [7], or [10] is selected, press as to select [STEREO SYNC OUTPUT DELAY], and press qw to set the amount of delay output.

[0us] - [25 000 us] Allows you to set in increments of 10 us.

ff To synchronize multiple projectors to display 3D images, use a frame synch input and output. Select [9] or [10] for the first projector.

Select [6], [7], or [8] for the second and subsequent projectors.

ff Stereo synchronization is a signal having a 50 % duty cycle where High is for the left eye and Low is for the right eye.

ff “H” is output to the 3D image display and “L” is output to the 2D image display from the terminal for which 3D trigger output is selected.

Note

ff [11] or [3D SYNC MODE] is the setting when the 3D IR transmitter TY-3DTRW of Panasonic is used with the projector. Consult your dealer regarding the connection method.

[3D SIMUL INPUT SETTING]

Set this item to input and use 3D video signals of the simultaneous system.

1)Press as to select [3D SIMUL INPUT SETTING].

2)Press the <ENTER> button.

ff The [3D SIMUL INPUT SETTING] screen is displayed.

3)Press as to select [LEFT:RGB1 RIGHT:RGB2], [LEFT:HDMI RIGHT:DVI-D], or [LEFT:SDI1 RIGHT:SDI2] (only for PT‑DZ13KU, PT‑DS12KU).

4)Press qw to switch the setting.

[OFF]

Cannot use 3D simultaneous.

[AUTO]

Displays 3D images of the simultaneous system.

Note

ff When set to [AUTO], 3D images are displayed when the same 3D compatible signals are entered to each input. However, the P IN P status during P IN P is maintained.

ff This may not function properly for some connected external devices. ff Certain signals may not function properly.

[3D INPUT FORMAT]

Set the 3D format for the image signals being input.

Set a 3D format that matches the input signal.

1)Press as to select [3D INPUT FORMAT].

2)Press the <ENTER> button.

ff The [3D INPUT FORMAT] screen is displayed.

3)Press as to select a 3D format.

 

[AUTO]*1

Automatically detects 3D format of input image signals and displays images.

 

[NATIVE]

Forcibly displays 2D images regardless of input image signals.

 

[SIMULTANEOUS]*2

Forcibly displays 3D images in simultaneous system regardless of input video signals.

 

[SIDE BY SIDE]

Forcibly displays 3D images in side by side format regardless of input image signals.

 

[TOP AND BOTTOM]

Forcibly displays 3D images in top and bottom format regardless of input image signals.

 

[LINE BY LINE]*3

Forcibly displays 3D images in line by line system regardless of input video signals.

 

[FRAME SEQUENTIAL]*4

Forcibly displays 3D images in frame sequential format regardless of input image signals.

*1

During DVI‑D or HDMI input only

*2

During 3G‑SDI level B input only

*3

Only while signals other than interlaced signals are input

*4

Only while progressive signals with the vertical scanning frequency of 100 Hz or 120 Hz are input to the <RGB1>/<RGB2>/<DVI-D> terminals

4)Press the <ENTER> button.

92 - ENGLISH