Chapter 4 Settings — [PROJECTOR SETUP] menu

ff When [USER] is selected, proceed to Step 3).

3)Press the <ENTER> button.

4)Press as to select one from [PIN2] to [PIN8], and press qw to switch the setting.

[FUNCTION BUTTON]

Set the functions of the <FUNC> button on the remote control.

1)Press as to select [FUNCTION BUTTON].

2)Press the <ENTER> button.

ff The [FUNCTION BUTTON] screen is displayed.

3)Press as to select a function.
[DISABLE]

Disables the <FUNC> button.

[P IN P]

Switches [OFF]/[USER1]/[USER2]/[USER3] in [P IN P]. (x page 125)

[SUB MEMORY]

Displays the sub memory list. (x page 130)

[SYSTEM SELECTOR]

Switches the [SYSTEM SELECTOR] setting. (x page 77)

[SYSTEM DAYLIGHT VIEW]

Switches the [SYSTEM DAYLIGHT VIEW] setting. (x page 75)

[FREEZE]

Temporarily pauses the image. (x page 105)

[WAVEFORM MONITOR]

Displays the waveform of the input signal. (x page 105)

[LENS MEMORY LOAD]

Calls the registered lens memory. (x page 122)

[LEFT/RIGHT SWAP]*1

Switches the flip horizontal settings. (x page 93)

*1 Only for PT‑DZ13KU, PT‑DS12KU, PT‑DW11KU

4)Press the <ENTER> button.

[DATE AND TIME]

Set the time zone, date, and time of the built-in clock of the projector.

Setting the time zone

1)Press as to select [DATE AND TIME].

2)Press the <ENTER> button.

ff The [DATE AND TIME] screen is displayed.

3)Press as to select [TIME ZONE].4)Press qw to switch [TIME ZONE].

Setting the date and time manually

1)Press as to select [DATE AND TIME].

2)Press the <ENTER> button.

ff The [DATE AND TIME] screen is displayed.

3)Press as to select [ADJUST CLOCK].

4)Press the <ENTER> button.

ff The [ADJUST CLOCK] screen is displayed.

5)Press as to select an item, and press qw to set the local date and time.6)Press as to select [APPLY], and press the <ENTER> button.

ff The setting of the date and time will be completed.

Setting the date and time automatically

1)Press as to select [DATE AND TIME].

ENGLISH - 121