Chapter 4 Settings — [SECURITY] menu

2)Press the <ENTER> button.

ff The [CONTROL DEVICE SETUP] screen is displayed.

3)Press as to select [CONTROL PANEL] or [REMOTE CONTROL].

4)Press the <ENTER> button.

5)Press as to select [CONTROL PANEL] or [REMOTE CONTROL].

6)Press qw to switch [USER].7)Press as to select the button item to set.

ff When [INPUT SELECT BUTTON] is selected, press the <ENTER> button, and then press as to select the button to set.

 

 

Buttons that can be set

 

[CONTROL PANEL]

 

[REMOTE CONTROL]

[POWER BUTTON]

Power standby <v> button, power on <b> button

[INPUT SELECT BUTTON]

<VIDEO> button, <RGB1> button, <RGB2> button, <DVI-D> button, <HDMI> button, and <SDI 1/2>

button*1

 

 

 

 

 

[MENU BUTTON]

<MENU> button

 

 

[LENS BUTTON]

<LENS> button

 

<FOCUS> button, <ZOOM> button, <SHIFT>

 

button

 

 

 

[AUTO SETUP BUTTON]

<AUTO SETUP> button

 

 

[SHUTTER BUTTON]

<SHUTTER> button

 

 

[ASPECT BUTTON]

—

 

<ASPECT> button

[ON SCREEN BUTTON]

—

 

<ON SCREEN> button

[OTHER BUTTON]

asqw, <ENTER> button

 

Buttons not listed above

*1 Only for PT‑DZ13KU, PT‑DS12KU, PT‑DZ10KU

8)Press qw to switch the item.

[ENABLE]

Enables button operations.

[DISABLE]

Disables button operations.

ff The following items are available when [SDI1/2 BUTTON] is selected in [INPUT SELECT BUTTON] in PT‑DZ13KU and PT‑DS12KU.

[TOGGLE]

Switches between SDI1 and SDI2 when the button is operated.

[SDI1]

Fixes to SDI1.

[SDI2]

Fixes to SDI2.

[DISABLE]

Disables button operations.

ff When [INPUT SELECT BUTTON] is selected in Step 7), press the <MENU> button to return to the [CONTROL PANEL] screen or the [REMOTE CONTROL] screen.

9)Press as to select [APPLY], and press the <ENTER> button.

ff The confirmation screen is displayed.

10)Press qw to select [OK], and press the <ENTER> button.

Note

ff When a button operation is performed on the device set to [DISABLE], the [CONTROL DEVICE PASSWORD] screen is displayed. Enter the control device password.

ff The [CONTROL DEVICE PASSWORD] screen will disappear when there is no operation for approx. 10 seconds.

ff If the operations of both [CONTROL PANEL] and [REMOTE CONTROL] are set to [DISABLE], the projector cannot be turned off (cannot enter standby).

ff When the setting has completed, the menu screen will disappear. To operate continuously, press the <MENU> button to display the main menu.

ff Even when button operation on the remote control is disabled, the <ID SET> button and the <ID ALL> button are enabled.

[CONTROL DEVICE PASSWORD CHANGE]

The control device password can be changed.

1)Press as to select [CONTROL DEVICE PASSWORD CHANGE].

2)Press the <ENTER> button.

ff The [CONTROL DEVICE PASSWORD CHANGE] screen is displayed.

3)Press asqw to select the text, and press the <ENTER> button to enter the text.

ENGLISH - 133