Panasonic PT-DS12KU, PT-DW11KU, PT-DZ10KU, PT-DZ13KU [GAMMA], Changing the name of [USER1] or [USER2], Note, Note, Press, Press, Press, Press, Press, Press, [GAMMA], [USER1], [USER2], [DEFAULT]*1

Chapter 4 Settings — [PICTURE] menu

4)Press the <ENTER> button.

ff The [CHANGE TO *****] screen is displayed.

5)Press as to select [USER1] or [USER2].

ff The status of the color temperature changed is saved to the selected item.

6)Press the <ENTER> button.

ff The confirmation screen is displayed.

7)Press qw to select [OK], and press the <ENTER> button.

ff The [USER1] or [USER2] data is overwritten.

ff If you press qw to select [CANCEL] and then press the <ENTER> button, the data will not be overwritten.

ff The [WHITE BALANCE HIGH] screen is displayed.

8)Press as to select [RED], [GREEN], or [BLUE].9)Press qw to adjust the level.

Note

ff Adjust [COLOR TEMPERATURE] correctly. All colors will not be displayed properly unless adequate adjustment is made. If the adjustment does not look suitable, you can press the <DEFAULT> button on the remote control to return the setting for the selected item only to the factory default setting.

ff When color temperature has been changed, the colors before and after the change will differ slightly.

Changing the name of [USER1] or [USER2]

1)Press as to select [COLOR TEMPERATURE].

2)Press qw or the <ENTER> button.

ff The [COLOR TEMPERATURE] individual adjustment screen is displayed.

3)Press qw to select [USER1] or [USER2].

4)Press the <ENTER> button.

ff The [COLOR TEMPERATURE] screen is displayed.

5)Press as to select [COLOR TEMPERATURE NAME CHANGE].

6)Press the <ENTER> button.

ff The [COLOR TEMPERATURE NAME CHANGE] screen is displayed.

7)Press asqw to select the text, and press the <ENTER> button to enter the text.

8)Press asqw to select [OK], and press the <ENTER> button.

ff The name set to color temperature is changed.

Note

ff When a name is changed, display of [USER1], [USER2] is also changed.

[GAMMA]

You can switch gamma mode.

1)Press as to select [GAMMA].

2)Press qw or the <ENTER> button.

ff The [GAMMA] individual adjustment screen is displayed.

3)Press qw to switch the item.

ff The items will switch each time you press the button.

[DEFAULT]*1	Factory default setting.
[USER1]	Allows you to change the name.
[USER2]	Refer to “Changing the name of [USER1] or [USER2]” (x page 75) for details.
[DICOM SIM.]	The picture becomes similar to that of DICOM standard.

74 - ENGLISH