Panasonic PT-DS12KU, PT-DW11KU, PT-DZ10KU, PT-DZ13KU [SCHEDULE], How to set a program, How to assign a program, Enabling/disabling the schedule function, 11), [ON], Note, Press, [OFF], Press, Press, Press, Press

Chapter 4 Settings — [PROJECTOR SETUP] menu

[SCHEDULE]

Set the command execution schedule for each day of the week.

Enabling/disabling the schedule function

1)Press as to select [SCHEDULE].

2)Press qw to switch the item.

ff The items will switch each time you press the button.

[OFF]	Disables the schedule function.
[ON]	Enables the schedule function. Refer to “How to assign a program” (x page 116) or “How to set a
	program” (x page 116) for how to set the schedule.

Note

ff When [SCHEDULE] is set to [ON], the [STANDBY MODE] setting is forcibly switched to [NORMAL], and the setting cannot be changed. Even if [SCHEDULE] is then set to [OFF] when in this state, the setting of [STANDBY MODE] remains at [NORMAL].

How to assign a program

1)Press as to select [SCHEDULE].

2)Press qw to select [ON], and press the <ENTER> button.

ff The [SCHEDULE] screen is displayed.

3)Select and assign program to each day of week.

ff Press as to select the day of week, and press qw to select a program number.

ff You can set the program from No.1 to No.7. “‑ ‑ ‑” indicates that the program number has not been set.

How to set a program

Set up to 16 commands to each program.

1)Press as to select [SCHEDULE].

2)Press qw to select [ON], and press the <ENTER> button.

ff The [SCHEDULE] screen is displayed.

3)Press as to select [PROGRAM EDIT].4)Press qw to select a program number, and press the <ENTER> button.5)Press as to select a command number, and press the <ENTER> button.

ff You can change the page using qw.

6)Press asqw to select [TIME], and press the <ENTER> button.

7)Press qw to select “hour” or “minute”, and press as or the number (<0> - <9>) buttons to set a time, and then press the <ENTER> button.

8)Press asqw to select [COMMAND].9)Press qw to switch the item.

ff The items will switch each time you press the button.

ff For the detailed settings of [COMMAND], the details set in Step 11) are displayed.

[COMMAND]	Detailed settings of	Description
	[COMMAND]
[POWER ON]	―	Switches on the projector.
[STANDBY]	―	Enters standby.
[SHUTTER]	[OPEN]	Opens the shutter.
	[CLOSE]	Closes the shutter.

116 - ENGLISH