Chapter 3Basic Operations — Projecting

rrFront view diagram of the lens mounter (viewed from the screen side)

(a)

Lens mount bracket

Fixing screws

(b)(c)

Note

ff Focus adjustment screws (a), (b), and (c) are adjusted with the lens attached.

Adjustment procedurerrRelationship between the adjustment location and adjustment screws

(b)+(c)

(b)

(c)

(a)

Adjustment location:

Location where the just focus point of the screen is in the inner side of the screen

 

When the just focus point of

When the just focus point of the

When the just focus point of

When the just focus point of the

 

the screen in V up (top in the

screen in V bottom (bottom in

the screen in H left (left in the

screen in H right (right in the

 

vertical direction) is in the inner

the vertical direction) is in the

horizontal direction) is in the

horizontal direction) is in the

 

side of the screen

inner side of the screen

inner side of the screen

inner side of the screen

(a)

Rotate counterclockwise

(b)

Rotate counterclockwise

Rotate counterclockwise

(c)

Rotate counterclockwise

Rotate counterclockwise

1)Press the <FOCUS> button on the remote control or the <LENS> button on the control panel to display the [FOCUS] adjustment menu.

2)Press s to shift the focus of the entire screen once.3)Press a to stop on any part of the screen to be the first just focus point.

ff For the location where focus is shifted in this state, the just focus point is on the inner side of the screen.

4)Loosen the fixed screws in the position relative to the location where the focus is shifted the most (the location where the just focus point is shifted the most towards the inner side in Step 2)) up to two rotations.

ff Turn screws clockwise in two locations, or at least in one location to be adjusted.

5)Little by little, turn the focus adjustment screws corresponding to the locations counterclockwise and stop where the image is in focus. (x page 58)

ff If the screws are turned counterclockwise, the tilt of the lens will change by moving the lens mount bracket of the lens mounter forward (screen side), and in the projected image on the screen, the focus point in the opposite direction of the adjustment screws will move from the inner side of the screen to the outside.

ENGLISH - 59