Panasonic PT-DS12KU, PT-DW11KU, PT-DZ10KU, PT-DZ13KU Security, Disposal, Cautions on use, rrDLP chips, rrTo get a good picture quality, rrDo not touch the surface of the projection lens with your bare hands

Chapter 1 Preparation — Precautions for use

ffPrevent hot and cool air from the air conditioning system to blow directly to the ventilation ports (intake and exhaust) of the projector.

+15°

-15°

500 mm (20") or longer 500 mm (20") or longer 500 mm (20") or longer

100 mm (4") or longer

ffDo not install the projector in a confined space.

When it is necessary to install the projector in a confined space, install the air conditioning or ventilation separately. Exhaust heat may accumulate when the ventilation is not enough, triggering the protection circuit of the projector.

Security

When using this product, take safety measures against the following incidents.

ffPersonal information being leaked via this product

ffUnauthorized operation of this product by a malicious third party

ffInterfering or stopping of this product by a malicious third party

Take sufficient security measures. (x pages 131, 150)

ffMake your password difficult to guess as much as possible. ffChange your password periodically.

ffPanasonic Corporation or its affiliate companies will never ask for your password directly. Do not divulge your password in case you receive such inquiries.

ffThe connecting network must be secured by a firewall, etc.

ffSet a password for the web control and restrict the users who can log in.

Disposal

To dispose of the product, ask your local authorities or dealer for correct methods of disposal.

The lamp contains mercury. When disposing of used lamp units, contact your local authorities or dealer for correct methods of disposal.

Cautions on use

rrTo get a good picture quality

In order to view a beautiful image in higher contrast, prepare an appropriate environment. Draw curtains or blinds over windows and turn off any lights near the screen to prevent outside light or light from indoor lamps from shining onto the screen.

rrDo not touch the surface of the projection lens with your bare hands.

If the surface of the projection lens becomes dirty from fingerprints or anything else, this will be magnified and projected onto the screen.

Attach the supplied lens cover to the projection lens when you do not use the projector.

rrDLP chips

ffThe DLP chips are precision-made. Note that in rare cases, pixels of high precision could be missing or always lit. Note that such phenomena does not indicate malfunction.

18 - ENGLISH