Chapter 4 Settings — [DISPLAY OPTION] menu

Adjusting the color matching using a colorimeter

Use a colorimeter that can measure chromaticity coordinates and luminance to change the colors [RED], [GREEN], [BLUE], [CYAN], [MAGENTA], [YELLOW], or [WHITE] to desired colors.

1)Press as to select [COLOR MATCHING].

2)Press qw to select [709MODE] or [MEASURED].

3)Press the <ENTER> button.

ff The [709MODE] or [MEASURED MODE] screen is displayed.

4)Press as to select [MEASURED DATA].

5)Press the <ENTER> button.

ff The [MEASURED DATA] screen is displayed.

6)Measure the current luminance (Y) and the chromaticity coordinates (x, y) using the colorimeter.

7)Press as to select a color, and press qw to adjust the setting.

ff Set [AUTO TESTPATTERN] to [ON] to display a test pattern of selected colors.

8)Once all the input is completed, press the <MENU> button.

ff The [709MODE] or [MEASURED MODE] screen is displayed.

ff When [MEASURED] is selected in Step 2), proceed to Step 9) and enter the coordinates of desired colors.

9)Press as to select [TARGET DATA].10)Press the <ENTER> button.

ff The [TARGET DATA] screen is displayed.

11) Press as to select a color and press qw to input coordinates for desired colors.

ff Set [AUTO TESTPATTERN] to [ON] to display a test pattern of selected colors.

12)Once all the input is completed, press the <MENU> button. Note

ff When [709MODE] is selected in [COLOR MATCHING], the ITU‑R BT.709 standard three primary colors are set as target data. ff Colors are not displayed properly when target data is a color outside the region of this projector.

ff The [709MODE] may differ slightly from the ITU‑R BT.709 standard colors.

ff Set the [AUTO TESTPATTERN] to [ON] to automatically display a test pattern for use in adjusting the selected adjustment colors. ff Before using a colorimeter or similar instrument to measure measurement data, set [PICTURE MODE] to [DYNAMIC].

ff A difference in the color coordinates of target data and measurement values obtained from an instrument may occur for certain instruments and measurement environments used.

ff [AUTO TESTPATTERN] settings change together with the [AUTO TESTPATTERN] of [EDGE BLENDING].

[LARGE SCREEN CORRECTION]

Corrects the phenomenon in which colors that appear lighter when viewed on a large screen viewed from a close distance compared to when viewed on an average screen size so that colors appear the same.

1)Press as to select [LARGE SCREEN CORRECTION].

2)Press qw to switch the item.

[OFF]

Performs no correction.

[1]Performs weak correction.

[2]Performs strong correction.

[SCREEN SETTING]

(Only for PT‑DZ13KU, PT‑DS12KU, PT‑DZ10KU)

Set the screen size.

When changing the aspect of a projected image, correct to the optimum image position for the set screen. Set as necessary for the screen in use.

1)Press as to select [SCREEN SETTING].

2)Press the <ENTER> button.

ff The [SCREEN SETTING] screen is displayed.

ENGLISH - 97