Panasonic PT-DS12KU, PT-DW11KU, PT-DZ10KU, PT-DZ13KU [SAVE ALL USER DATA], [LOAD ALL USER DATA], [INITIALIZE], [SERVICE PASSWORD], Note, [INITIALIZE], [ALL USER DATA], [NETWORK/E-MAIL], [SECURITY PASSWORD]

Chapter 4 Settings — [PROJECTOR SETUP] menu

ff If you press asqw to select [CANCEL] and then press the <ENTER> button, the changed name will not be registered.

ff If you press asqw to select [DEFAULT] and press the <ENTER> button, the changed name will not be registered and the default name will be used.

ff If you select [OK] without entering any characters and press the <ENTER> button, the default name will be used.

[SAVE ALL USER DATA]

Save the various setting values as a backup in the built-in memory of the projector.

1)Press as to select [SAVE ALL USER DATA].

2)Press the <ENTER> button.

ff The [SECURITY PASSWORD] screen is displayed.

3)Enter a security password and press the <ENTER> button.

4)When the confirmation screen is displayed, press qw to select [OK], and press the <ENTER> button.

ff [PROGRESS] is displayed while saving data.

[LOAD ALL USER DATA]

Load the various setting values saved as a backup in the built-in memory of the projector.

1)Press as to select [LOAD ALL USER DATA].

2)Press the <ENTER> button.

ff The [SECURITY PASSWORD] screen is displayed.

3)Enter a security password and press the <ENTER> button.

4)When the confirmation screen is displayed, press qw to select [OK], and press the <ENTER> button.

Note

ff The projector will go into the standby status to reflect the setting values when [LOAD ALL USER DATA] is executed. ff Data registered from a computer is not included in [ALL USER DATA].

[INITIALIZE]

Return various setting values to their factory default settings.

1)Press as to select [INITIALIZE].

2)Press the <ENTER> button.

ff The [SECURITY PASSWORD] screen is displayed.

3)Enter a security password and press the <ENTER> button.

ff The [INITIALIZE] screen is displayed.

4)Press as to select an item to initialize.

[ALL USER DATA]	Returns all setting items including [REGISTERED SIGNAL], [NETWORK SETUP], [E-mail set up],
	and [USER LOGO] to factory default settings.
	The projector will go into the standby status to reflect the setting values.
[REGISTERED SIGNAL]	Deletes all the setting values saved for each input signal.
	To delete only a part of a registered signal, perform the procedure described in “Deleting the
	registered signal” (x page 128).
[NETWORK/E-MAIL]	Returns [NETWORK SETUP] and [E-mail set up] to factory default settings.
[LOGO IMAGE]	Deletes the image registered in [USER LOGO].

5)Press the <ENTER> button.

6)When the confirmation screen is displayed, press qw to select [OK], and press the <ENTER> button.

[SERVICE PASSWORD]

This function is used by a service person.

124 - ENGLISH