Chapter 4Settings — [DISPLAY OPTION] menu

[SHUTTER SETTING]

Set image fade-in and fade-out at opening and closing of the shutter. Set automatic opening and closing of the shutter when power is turned on.

Setting [FADE-IN] or [FADE-OUT]

1)Press as to select [SHUTTER SETTING].

2)Press the <ENTER> button.

ff The [SHUTTER SETTING] screen is displayed.

3)Press as to select [FADE-IN] or [FADE-OUT].

4)Press qw to switch the item.

 

Item

Adjustment

 

 

[OFF]

Does not set fade-in or fade-out.

[FADE-IN]

 

 

Allows you to set the fade-in or fade-out time.

[FADE-OUT]

 

[0.5 s] - [10.0 s]

Select an item from [0.5 s] to [4.0 s], [5.0 s], [7.0 s], and [10.0 s].

 

 

 

[0.5 s] - [4.0 s] can be selected in increments of 0.5.

Note

ff Press the <SHUTTER> button on the remote control or the control panel during fade-in or fade-out to cancel the fade operation.

Setting [STARTUP]

1)Press as to select [SHUTTER SETTING].

2)Press the <ENTER> button.

ff The [SHUTTER SETTING] screen is displayed.

3)Press as to select [STARTUP].

4)Press qw to switch the item.

[OPEN]

Projection begins with the shutter open when the power is turned on.

[CLOSE]

Projection begins with the shutter close when the power is turned on.

[FREEZE]

Pause the projected image temporarily regardless of the playback of the external device.

1)Press as to select [FREEZE].

2)Press the <ENTER> button.

ff Press the <MENU> button to release.

Note

ff [FREEZE] is displayed on the screen when video is paused.

[WAVEFORM MONITOR]

Use the input signals from a connected external device to display in a waveform. Check whether video output (luminance) signal level is within the recommended range for the projector and adjust.

1)Press as to select [WAVEFORM MONITOR].

2)Press qw to switch the item.

[OFF]

Does not display the waveform monitor.

[ON]

Displays the waveform monitor.

3)Press the <MENU> button two times to clear.4)Press as to select any horizontal line.

ENGLISH - 105