Chapter 1 Preparation — Start-up display

Initial setting (installation setting)

Set [PROJECTION METHOD] and [COOLING CONDITION] depending on the installation mode. Refer to “Installation mode” (x page 31) for details.

Set [HIGH ALTITUDE MODE] to [ON] when using the projector at high altitudes between 1 400 m (4 593') or higher and lower than 2 700 m (8 858') above sea level.

After completed the initial setting, you can change the settings of each item from the [PROJECTOR SETUP] menu.

1)Press as to select an item.2)Press qw to switch the setting.

INITIAL SETTING

PROJECTION METHOD

FRONT/FLOOR

 

 

 

 

When PROJECTION METHOD is changed, confirm that

COOLING CONDITION is set correctly.

COOLING CONDITION

AUTO

 

 

 

 

It may shorten the life of the lamp and projector if used in incorrect setting.

HIGH ALTITUDE MODE

OFF

 

 

 

 

Switch to HIGH ALTITUDE MODE "ON" if over 1400m (4593Ft).

MENU SELECT

CHANGE

ENTER SET

3)Press the <ENTER> button to proceed to the initial setting.

Initial setting (screen setting)

(Only for PT‑DZ13KU, PT‑DS12KU, PT‑DZ10KU)

Set the screen format (aspect ratio) and display position of the image. After completed the initial setting, you can change the settings of each item from the [DISPLAY OPTION] menu → [SCREEN SETTING].

1)Press as to select an item.

2)Press qw to switch the setting.

INITIAL SETTING

SCREEN FORMAT

16:10

 

 

 

 

SCREEN POSITION

Set as necessary for the screen in use.

MENU SELECT

CHANGE

ENTER SET

ff [SCREEN FORMAT] (x page 97)

ff [SCREEN POSITION] (x page 97)

3)Press the <ENTER> button.

ff Confirm the setting value and complete the initial setting.

Note

ff If you press the <MENU> button on the initial setting screen, you can go back to the previous screen.

ff To continue operations after completed the initial settings, refer to “Selecting the input signal” (x page 56).

ff By default, the time zone of the projector is set to +09:00 (Japan and Korean Standard Time). Change the setting in the [PROJECTOR SETUP] menu → [DATE AND TIME] → [TIME ZONE] to the time zone of the region where you use the projector.

ENGLISH - 23