Chapter 4 Settings — [POSITION] menu

[KEYSTONE]

(Only for PT‑DW11KU)

You can correct the trapezoidal distortion that occurs when the projector is installed tilted or when the screen is tilted.

1)Press as to select [KEYSTONE].

2)Press the <ENTER> button.

3)Press as to select the item to adjust.4)Press qw to adjust.

[KEYSTONE]

[SUB KEYSTONE]

 

 

[LINEARITY]

Note

ff The menu or logo may run off the screen when adjustments are performed with [KEYSTONE].

ff Correcting up to ±40° for the tilt in the vertical direction is available for adjustments with [KEYSTONE]. However, the image quality will degrade and it will get harder to focus with more correction. Install the projector so that the correction will be as small as possible. (±22° when using projection lens ET‑D75LE5/ET‑D75LE50, or ±28° when using the projection lens ET‑D75LE6.)

ff Screen size will also change when [KEYSTONE] is used to perform various adjustments.

ff When the keystone is corrected with [KEYSTONE], the edge blending cannot be adjusted together. ff Aspect ratio of the image size may shift depending on the correction or lens zoom value.

ff For the portrait setting, keystone is corrected for horizontal tilt.

84 - ENGLISH