Panasonic PT-DS12KU, PT-DW11KU, PT-DZ10KU, PT-DZ13KU List of 3D compatible signals, Mode, freq, RGB2, HDMI, (Hz), HDMI, freq, (Hz), DVI‑D, (kHz), (MHz), EDID1, EDID2, EDID3, DVI‑D, (kHz), (MHz), Format

Chapter 6 Appendix — Technical information

	Resolution	Scanning freq.		Dot clock			Plug and play*1
Mode		Horizontal	Vertical	freq.	Format			DVI‑D
	(Dots)					RGB2				HDMI
		(kHz)	(Hz)	(MHz)			EDID1	EDID2	EDID3
	1 920 x 1 080	55.6	49.9	141.5	R/D/H	―	―	―	―	―
1920 x 1080	1 920 x 1 080*7	66.6	59.9	138.5	R/D/H	―	―	―	―	―
	1 920 x 1 080*9	67.2	60.0	173.0	R	―	―	―	―	―
	1 920 x 1 200	61.8	49.9	158.3	R/D/H	―	―	―	―	―
WUXGA	1 920 x 1 200*7	74.0	60.0	154.0	R/D/H	l	―	l	l*10	l*10
	1 920 x 1 200*9	74.6	59.9	193.3	R	―	―	―	―	―

*1 Signals with l in the Plug and play columns are signals described in EDID (extended display identification data) of the projector. A signal, which has no l in the Plug and play columns but has an entry in the Format column, can be input. For signals without l in the Plug and play columns, resolution may not be selected in the computer even though the projector supports them.

*2 For single link connections only

*3 Pixel-Repetition signal (dot clock frequency 27.0 MHz) only

*4 When a 1125 (1035)/60i signal was input, it is displayed as a 1125 (1080)/60i signal.

*5 Only for SDI1

*6 For dual link connections only

*7 VESA CVT-RB (Reduced Blanking)-compliant

*8 Only for PT‑DW11KU

*9 Samples the pixels in the image processing circuit and projects the image. *10 Only for PT‑DZ13KU, PT‑DZ10KU

Note

ff There are 1 920 x 1 080 display dots for PT‑DZ13KU and PT‑DZ10KU, 1 400 x 1 050 for PT‑DS12KU, and 1 366 x 768 for PT‑DW11KU. A signal with a different resolution is converted to the number of display dots.

ff The “i” at the end of the resolution indicates an interlaced signal.

ff When interlaced signals are connected, flickering may occur on the projected image.

List of 3D compatible signals

(Only for PT‑DZ13KU, PT‑DS12KU, PT‑DW11KU)

The following table specifies the 3D compatible video signals that the projector can project. Items that are applicable to 1 to 10 in the table are as follows.

1Frame packing system2Side by side system3Top and bottom system4Line by line system5Frame sequential system63G‑SDI Level B simultaneous system7HDMI & DVI‑D8RGB1 & RGB29SDI1 & SDI2 (only for PT‑DZ13KU, PT‑DS12KU)10 Simultaneous system

	Resolution	Scanning freq.		Dot clock		HDMI			DVI‑D
3D compatible signal		Horizontal	Vertical	freq.
	(Dots)				1	2*1	3	2*1	3	4	5
		(kHz)	(Hz)	(MHz)
750 (720)/60p	1 280 x 720	45.0	60.0	74.3	l	l	l	l	l	l	―
750 (720)/50p	1 280 x 720	37.5	50.0	74.3	l	l	l	l	l	l	―
1080/60i	1 920 x 1 080i	33.8	60.0	74.3	l	l	―	l	l	―	―
1080/50i	1 920 x 1 080i	28.1	50.0	74.3	l	l	―	l	l	―	―
1080/24p	1 920 x 1 080	27.0	24.0	74.3	l	l	l	l	l	―	―
1080/24sF	1 920 x 1 080i	27.0	48.0	74.3	―	―	―	l	l	―	―
1080/25p	1 920 x 1 080	28.1	25.0	74.3	―	―	―	l	l	―	―
1080/30p	1 920 x 1 080	33.8	30.0	74.3	―	―	―	l	l	―	―
1080/60p	1 920 x 1 080	67.5	60.0	148.5	―	l	l	l	l	―	―
1080/50p	1 920 x 1 080	56.3	50.0	148.5	―	l	l	l	l	―	―
VGA480	640 x 480	31.5	59.9	25.2	―	―	―	l	―	―	―
SVGA	800 x 600	37.9	60.3	40.0	―	―	―	l	―	―	―
	1 024 x 768	39.6	50.0	51.9	―	―	―	l	―	―	―
XGA	1 024 x 768	48.4	60.0	65.0	―	―	―	l	―	―	―
	1 024 x 768	81.4	100.0	113.3	―	―	―	―	―	―	l
	1 024 x 768	98.8	120.0	139.1	―	―	―	―	―	―	l

ENGLISH - 177