Chapter 4 Settings — [PICTURE] menu

2)Press qw or the <ENTER> button.

ff The [COLOR TEMPERATURE] individual adjustment screen is displayed.

3)Press qw to switch the item.

ff The items will switch each time you press the button.

[DEFAULT]

Factory default setting.

[USER1]

Adjusts white balance as desired. Refer to “Adjusting desired white balance” (x page 73) for

[USER2]

details.

[3200K] - [9300K]

Allows you to set in increments of 100 K. Select so that images become natural.

Note

ff When [PICTURE MODE] (x page 71) is set to [USER] or [DICOM SIM.], [DEFAULT] cannot be selected.

ff When [COLOR MATCHING] (x page 96) adjustment is set to other than [OFF], [COLOR TEMPERATURE] is fixed to [USER1]. ff The color temperature numerical values are guidelines.

Adjusting desired white balance

1)Press as to select [COLOR TEMPERATURE].

2)Press qw or the <ENTER> button.

ff The [COLOR TEMPERATURE] individual adjustment screen is displayed.

3)Press qw to select [USER1] or [USER2].4)Press the <ENTER> button.

ff The [COLOR TEMPERATURE] screen is displayed.

5)Press as to select [WHITE BALANCE].6)Press the <ENTER> button.

ff The [WHITE BALANCE] screen is displayed.

7)Press as to select [WHITE BALANCE HIGH] or [WHITE BALANCE LOW].8)Press the <ENTER> button.

ff The [WHITE BALANCE HIGH] screen or the [WHITE BALANCE LOW] screen is displayed.

9)Press as to select [RED], [GREEN], or [BLUE].10)Press qw to adjust the level.
Item

Operation

Adjustment

Range of adjustment

[RED]

Press the w button.

Deepens red.

 

Press the q button.

Weakens red.

[WHITE BALANCE HIGH]: 0 - +255 (factory default is

 

 

Press the w button.

Deepens green.

[GREEN]

+255)

Press the q button.

Weakens green.

[WHITE BALANCE LOW]: -127 - +127 (factory default is

 

 

 

 

0)

[BLUE]

Press the w button.

Deepens blue.

 

Press the q button.

Weakens blue.

 

 

 

Note

ff Adjust [COLOR TEMPERATURE] correctly. All colors will not be displayed properly unless adequate adjustment is made. If the adjustment does not look suitable, you can press the <DEFAULT> button on the remote control to return the setting for the selected item only to the factory default setting.

Adjusting desired white balance based on existing color temperature settings

1)Press as to select [COLOR TEMPERATURE].

2)Press qw or the <ENTER> button.

ff The [COLOR TEMPERATURE] individual adjustment screen is displayed.

3)Press qw to select an item other than [DEFAULT], [USER1], or [USER2].

ENGLISH - 73