Panasonic PT-DS12KU, PT-DW11KU, PT-DZ10KU, PT-DZ13KU [CRESTRON RoomView] page, [OK], [OK], Note, [Retype], [Account], [User] account, [Old Password], [New Password], [New][Password], [New][User name]

Chapter 4 Settings — [NETWORK] menu

[User] account

1

2

3

4

5

1	[Account]	3	[New][Password]
	Displays the account to change.		Enter the desired new password. (Up to 16 characters in single
2	[New][User name]		byte)
		4	[New][Password(Retype)]
	Enter the desired new user name. (Up to 16 characters in single
	byte)		Enter the desired new password again.
		5	[OK]
			Determines the change of password.

[Change password] (For user rights)

Only the change of password is enabled under the user rights.

1 2 3 4

1	[Old Password]	3	[Retype]
	Enter the current password.		Enter the desired new password again.
2	[New Password]	4	[OK]
	Enter the desired new password. (Up to 16 characters in single		Determines the change of password.
	byte)

Note

ff To change the account of the administrator, you must enter the [User name] and [Password] in [Current].

[CRESTRON RoomView] page

The projector can be monitored/controlled with RoomView.

To start the RoomView control page from the web control screen, you need to access with the administrator rights. (For user rights, the [CRESTRON RoomView] button is not displayed on the web control screen.)

The control page of RoomView is displayed by clicking [CRESTRON RoomView].

It is not displayed if Adobe Flash Player is not installed on the computer used, or the browser used does not support Flash. In that case, click [Back] on the control page to go back to the previous page.

ENGLISH - 151