Paradyne HOTWIRE 7986 manual Table A-7. Snmp Traps Options 2, Enterprise Specific Traps

Configuration Option Tables

Table A-7. SNMP Traps Options (2 of 2)

Enterprise Specific Traps

Possible Settings: Enable, Disable

Default Setting: Disable

Determines if SNMP traps are generated for enterprise-specific events.

Enable ± SNMP traps are generated for enterpriseSpecific events.

NOTE: Refer to Enterprise Specific Traps in Appendix B, Standards Compliance for SNMP Traps.

Disable ± No enterprise-specific event traps are sent.

Link Traps

Possible Settings: Disable, Up, Down, Both

Default Setting: Both

Determines if SNMP traps are generated for link up and link down for one of the communication interfaces.

Disable ± No linkUp or linkDown SNMP traps are generated.

Up ± A linkUp trap is generated when the 7986 Termination Unit recognizes that one of the communication interfaces is operational.

Down ± A linkDown trap is generated when the 7986 Termination Unit recognizes a failure in one of the communication interfaces.

Both ± Sends trap messages for detection of both linkUp and linkDown.

NOTE: Refer to linkUp and linkDown in Appendix B, Standards Compliance for SNMP Traps.

Link Trap Interfaces

Possible Settings: Network, SYNC, All

Default Setting: All

Determines if the SNMP linkUp, SNMP linkDown, and interface-related enterpriseSpecific traps are generated for the network interface, synchronous data (DTE) port, or both.

Network ± SNMP trap messages are generated for the network interface.

SYNC ± SNMP trap messages are generated for the synchronous data (DTE) port.

All ± SNMP trap messages are generated for the network E1 interface and the synchronous data (DTE) ports.

A-18 September 1998 7986-A2-GB20-00