Paradyne HOTWIRE 7986 manual Ending an Active Test

Testing

Ending an Active Test

Except for the Remote Send Line Loopback and Remote DCLB, a test initiated by the user can be ended by the user. Tests can also be terminated automatically by enabling the Test Timeout option from the System Options Menu.

HA Test Timeout option is available to automatically terminate a user-initiated Loopback or Pattern test (as opposed to manually terminating a test) after it has been running a specified period of time. The default is 10 minutes. Refer to Table A-3,System Options.

Test Timeout does not pertain to tests initiated by the network.

HOn each test screen is a Command column. To stop the test, press Enter when the cursor is on the Stop command.

HUse the Abort All Tests selection from the Test menu to stop all tests running on all interfaces, with the exception of network-initiated loopbacks. Command Complete appears when all tests on all interfaces have been terminated.

An aborted test may continue to run for a few seconds as the abort command is sent to the remote end and processed.

7986-A2-GB20-00 September 1998 5-9