
Monitoring the Unit
Test Status
The Test Status messages in the following table appear in the right column of the System and Test Status screen.
Table 4-3. Test Status Messages
Test Status Message | Meaning |
|
|
No Test Active | No tests are currently running. |
|
|
LLB Test Active, Pt 1 | A network Line Loopback test is active on Port 1. |
|
|
PLB Test Active, Pt 1 | A Payload Loopback test is active on Port 1. |
|
|
DTE Test Active, Pt 1 | A Data Terminal Loopback test is active on Port 1. |
|
|
RLB Test Active, Pt 1 | A Repeater Loopback test is active on Port 1. |
|
|
511 Test Active, Pt 1 | A 511 Test and Monitor is active on the DSL Port 1 network |
| interface. |
|
|
Lamp Test Active | The Lamp Test is active, causing the LEDs on the front panel to |
| light. |
|
|
For further information on testing, refer to Chapter 5, Testing.
September 1998 |