Testing

Running Network Tests

Network tests require the participation of your network service provider. To access the Network Tests screen, follow this menu selection sequence:

Main Menu Test Network & G.703 Tests

main/test/network_G.703 Hotwire

 

 

Model: 7986

 

NETWORK & G.703 TESTS

Test

Command Status

Results

±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±È±±±±±±±±±±±±±±±±±±±±±±±±±±±±±

Local Loopbacks

Line Loopback:

Start

Inactive

00:00:00

Repeater Loopback:

Start

Inactive

00:00:00

DTE Loopback:

Start

Inactive

00:00:00

Remote Loopbacks

 

 

 

Send Line Loopback: Down

Send

Inactive

00:00:00

Pattern Tests

 

 

 

Send and Monitor 511

Stop

Active

hh:mm:ss - Errors 99999+

±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±È±±±±±±±±±±±±±±±±±±±±±±±±±±±±±

Ctrl-a to access these functions, ESC for previous menu MainMenu Exit ResetMon

Use the Command column to start or stop a test. When the Status column shows that a test is Inactive, Start is displayed; when a test is Active, Stop is displayed. Position the cursor at the desired Start or Stop command and press Enter.

Selecting a Stop command on the Network Tests screen or Abort All Tests from the Test menu will not disrupt a network-initiated loopback.

The Results column displays the test duration.

When the Send and Monitor 511 test is active, ResetMon is available to reset the error counter to zero.

5-2

September 1998

7986-A2-GB20-00

Page 60
Image 60
Paradyne HOTWIRE 7986 manual Running Network Tests, Main Menu → Test → Network & G.703 Tests