Paradyne HOTWIRE 7986 Switchpack Definitions, Switchpack S1 Definitions Switch # Allows you to

Initial Startup and Configuration

Switchpack Definitions

Manually change configuration options by moving Switchpack S1 DIP switches on the card. Table 3-1 lists Switchpack S1 definitions.

Table 3-1. Switchpack S1 Definitions

Switch # . . .	Allows you to . . .	Default in Bold
1	Enables or disables Switchpacks S1 and S2.
	OFF = Switchpacks Disabled
	ON = Switchpacks Enabled

2

3

Controls line termination.

OFF = 120 Ohm

ON = 75 Ohm

Selects the unit's primary timing source. Only valid for units configured as LTU.

OFF = Internal Clock

ON = External Clock

4	Controls the unit's E1 line coding.
	OFF = HDB3
	ON = AMI
5	Not used
6	Enables CRC-4 monitoring.
	OFF = Enable CRC-4
	ON = Disable CRC-4 monitoring
7	Controls whether Channel 16 contains signaling information or data.
	OFF = Channel 16 is used for signaling
	ON = Channel 16 is used for data
8	Not used

3-8 September 1998 7986-A2-GB20-00