Paradyne HOTWIRE 7986 manual Switching Between Screen Work Areas, Example

Using the Asynchronous Terminal Interface

Switching Between Screen Work Areas

Select Ctrl-a to switch between the two screen work areas to perform all screen functions.

"Procedure

To access the screen function area below the dotted line:

1.Press Ctrl-a to switch from the screen area to the screen function key area below the dotted line.

2.Select either the function's designated (underlined) character or press the Tab key until you reach the desired function key.

Example:

To save the current screen, type s or S ( Save).

3.Press Enter.

4.To return to the screen area above the dotted line, press Ctrl-a again

main/config/network			Hotwire
		Model: 7986
	NETWORK INTERFACE OPTIONS
Margin Threshold:		±3db
Excessive Error Rate Threshold: 1E±5
AutoRate		Disable
DSL Line Rate		528
Peer IP Address:		111.255.255.000 Clear
Circuit Identifier:			Clear

±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±È±±±±±±±±±±±±±±±±±±±±±±±±±±±±±

Ctrl-a to access these functions, ESC for previous menu MainMenu Exit

Save

2-8 September 1998 7986-A2-GB20-00