Initial Startup and Configuration
Entering Identity Information
After accessing your unit for the first time, use the Change Identity screen to determine SNMP administrative system information that will be displayed on the Identity screen of the Status branch. To access the Identity screen, follow this menu selection sequence:
Main Menu → Control → Change
main/control/change_identity | Hotwire | |||
|
|
|
| Model: 7986 |
|
| IDENTITY |
| |
System Name: | Clear | |||
|
|
|
| |
System Location: Bldg. A412, 2nd Floor, Left cabinet |
| Clear | ||
System Contact: | C. Parker | Clear | ||
±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±È±±±±±±±±±±±±±±±±±±±±±±±±±±±±±
MainMenu Exit | |
Save |
|
Fields on the Card Identity screen are null until you enter values. The field values display 40 characters with a maximum field length of 128 characters. If a field value is greater than 40 characters in length, use the left or right arrow keys to view the remaining text. Valid values are any printable ASCII character. ASCII printable characters include:
HNumeric 0±9
HUpper or lower case A±Z
HSpace
HAll ASCII symbols except the caret (^)
Select Clear to reset a field to a null value.
"Procedure
To enter Change Identity screen information:
1.Position the cursor in the System Name field. Enter a name unique in your network to identify the SNMP managed node (or unit).
The maximum length of System Name is 128 characters.
2.Position the cursor in the System Location field. Enter the physical location of the unit.
The maximum length of System Location is 128 characters.
September 1998 |
