Pioneer F500BT operation manual Basic operation, Multi-Control

	Chapter
Basic operation	02

2MAP button

Press to view the map screen.

Press and hold to display the “Picture Ad- justment” screen.

=For details concerning operations, refer to Adjusting the screen brightness on page 94.

3LCD screen

4Bluetooth connection status indicator Lights up when your phone is paired to the navigation system by Bluetooth wireless technology.

During charging via the DC power jack, the indicator lights even if the system is pow- ered off. The indicator will go off after full charge.

5MULTI-CONTROL

Rotating;

Adjusts the AV (Audio and Video) source vo- lume.

Moving upward or downward once; Changes the map scale one step at a time. Keep moving upward or downward; Changes the map scale continuously.

pThis operation is available only while the map screen is displayed.

Moving MULTI-CONTROL to the left or right;

Allows you to change the frequency one step at a time; operates track search con- trols.

Keep moving MULTI-CONTROL to the left or right;

Allows you to perform manual seek tuning, fast forward or reverse.

Pressing the center of MULTI-CONTROL; Enables you to start the voice operation when “English” is selected in “Program lan- guage:”. (When a language other than “English” is selected, pressing the center al- lows you to hear the previous route gui- dance.)

pWhen your phone is paired to the naviga- tion system, pressing its center allows

you to answer an incoming call or end the phone call.

6Built-in microphone

Microphone for hands-free operation. Also this microphone can be used on the voice operation.

7Power button

When the system is powered off, press and hold the key to turn the power on.

When the system is powered on, press the key to go into the power-saving mode, and press and hold the key to turn the power off completely. When in power-saving mode, pressing returns the system to the normal mode.

8Optional GPS antenna jack

Use this jack only when optional GPS anten- na connection is necessary.

9Built-in speaker

When the sounds are not output in the fol- lowing conditions;

—The setting on “Audio Out Selection” is “Preout”

—Headphone being connected

aOptional microphone jack

Use this jack only when optional micro- phone connection is necessary.

bHeadphone jack

cSD card slot

=For more detailed information, refer to In- serting and ejecting an SD memory card on the next page.

dRESET button

=For details concerning operations, refer to Resetting the navigation system on page 9.

eBattery lock knob

To remove the batteries, move this knob to unlock position.

Basic operation

En 11