Pioneer F500BT Plugging and unplugging a USB storage device, Plugging in a USB storage device

Models: F500BT

1 129
Download 129 pages 63.71 Kb
Page 13
Image 13

 

Chapter

Basic operation

02

 

Plugging in a USB storage device

1 Connect the supplied USB cable to USB connector.

3 Pull out the SD memory card.

4 Close the cover.

Basic operation

Plugging and unplugging a USB storage device

CAUTION

!To prevent data loss and damage to the sto- rage device, never remove it from this naviga- tion system while data is being transferred.

!If data loss or corruption occurs on the sto- rage device for any reason, it is usually not possible to recover the data. Pioneer accepts no liability for damages, costs or expenses arising from data loss or corruption.

When you run this navigation system on power from the built-in battery alone, you cannot use an iPod and a USB memory device. To use them, supply power through this product by another method, such as connecting an AC adapter or vehicle power charger.

2Plug a USB storage device into the USB connector.

USB cable (supplied)

USB storage device

pCompatibility with all USB storage device is not guaranteed.

Optimum performance of this navigation system may not be obtained depending on the USB storage device that is connected.

pConnection via USB hub is not available.

Unplugging a USB storage device

%Pull out the USB storage device after checking that no data is being accessed.

En 13

Page 13
Image 13
Pioneer F500BT operation manual Plugging and unplugging a USB storage device, Plugging in a USB storage device