
Chapter
02
Basic operation
=Be sure to keep this knob to lock position in regular use. Otherwise, the navigation system cannot boot up.
fUSB connector
Use this port to connect an USB storage de- vice with using the supplied USB cable. Also you can connect an iPod (cable sold separately,
=For details, refer to Plugging and unplug- ging a USB storage device on the next page.
=For details, refer to Connecting your iPod on page 14.
gAV input jack
To connect your iPod using a USB interface cable for iPod
=Use the
hDC power jack
Use this jack only to connect with the AC adapter.
Inserting and ejecting an SD memory card
Inserting an SD memory card
1 Open the cover.
2Insert an SD memory card into the SD card slot.
Insert it with the label facing in the same di- rection as the LCD screen and press the card until it clicks and completely locks.
Label side
CAUTION
!To prevent data loss and damage to the sto- rage device, never remove it from this naviga- tion system while data is being transferred.
!If data loss or corruption occurs on the sto- rage device for any reason, it is usually not possible to recover the data. Pioneer accepts no liability for damages, costs or expenses arising from data loss or corruption.
3 Close the cover.
pThere is no compatibility for Multi Media
Card (MMC).
pCompatibility with all SD memory card is
not guaranteed.
pOptimum performance of this unit may not be obtained depending on the SD memory
card.
pDo not insert anything other than SD mem- ory cards or dummy SD cards into the SD card slot.
Ejecting an SD memory card
1Open the cover.
2Press the SD memory card until it clicks. The SD memory card is ejected.
12
En