Getting Started
If your service provider gave you these numbers, enter them here. If you do not have these numbers, highlight the Start icon and the ViewStation will locate them for you. If you quit while it is searching, your ViewStation will reboot and you have to start the setup process all over again. However, your previous entries are preserved. If you are behind a PBX, select the PBX icon, since you do not need to locate SPIDs.
ISDN Switch
On the ISDN Switch screen, select the network switch. Your ISDN service provider should have given you this information when you purchased the line. If the SPID was automatically detected, the system will bypass this screen because it found the information already. If you entered your SPID numbers manually, however, you need to use the arrow buttons on the remote to select the switch type.
ViewStation User’s Guide | 21 |
